
| d | 85 | mm | |
| D | 180 | mm | |
| B | 60 | mm | |
| d2 | ≈ | 108 | mm |
| D1 | ≈ | 154 | mm |
| b | 8.3 | mm | |
| K | 4.5 | mm | |
| r1,2 | min. | 3 | mm |
Tapered bore, taper 1:12

| Da | max. | 166 | mm |
| ra | max. | 2.5 | mm |
| Basic dynamic load rating | C | 577 | kN | |
| Basic static load rating | C0 | 620 | kN | |
| Fatigue load limit | Pu | 61 | kN | |
| Reference speed | 2800 | r/min | ||
| Limiting speed | 3800 | r/min | ||
| Calculation factor | e | 0.33 | ||
| Calculation factor | Y1 | 2 | ||
| Calculation factor | Y2 | 3 | ||
| Calculation factor | Y0 | 2 | ||
| Permissible rotational acceleration (oil lubrication) | 726 | g [m/s²] | ||
| Permissible linear acceleration (oil lubrication) | 206 | g [m/s²] |
| Mass bearing | 7.5 | kg |
| Recommended lock nut tightening angle | a | 150 | ° |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16008 | 40 | 68 | 9 | Bearings, units and housings |
|---|---|---|---|---|
| 21267 | 53.975 | 81 | 9.53 | Seals |
| BD-24034 CCK30/W33-AH 24034 | 160 | 260 | 90 | Bearings, units and housings |
| 25x42x10 HMS5 RG | 25 | 42 | 10 | Seals |
| 48x72x7 HMS5 RG | 48 | 72 | 7 | Seals |
| 6143 | 15.875 | 25.37 | 6.35 | Seals |
| BT4B 331243 A/HA1 | 520.7 | 736.6 | - | Bearings, units and housings |
| BT4B 332786/HA4 | 872.769 | 1181.1 | - | Bearings, units and housings |
| D/W R168 R-2Z | 6.35 | 9.525 | 3.175 | Bearings, units and housings |
| NNCL 4860 CV | 300 | 380 | 80 | Bearings, units and housings |
| SY 1.3/4 FM | 44.45 | - | - | Bearings, units and housings |
| W 6204 | 20 | 47 | 14 | Bearings, units and housings |
Hot number:
1315 K + H 315
16002-2Z
60x75x8 HMSA10 RG
6203-2Z/VA228
7310 BEGAF
7315 BEGAP
7318 BECBJ
AOH 3180 G
C 2213 KV
SNW 124x4.3/16
T2DC 220
SSAFS 22522 x 4 TLC
SSAFS 23026 KA x 4.7/16
SY 50 TDW
YAR 210-115-2RF/HV
Previous:BD-22317 EK-H 2317 Bearings, units and housings ---- Next:22318 E Bearings, units and housings
Return to SKF bearing