da | 112.713 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
ba | 51.594 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.922 | mm |
Housing |
SSAFS 026 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-26
|
|||
Labyrinth ring |
2 x LOR 117
|
|||
|
End plug (suffix Y) |
EPR 15
|
Bearing limiting speed | 3600 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 20.2 | kN |
Mass pillow block | 52.2 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14641 | 37.3126 | 60.3 | 9.53 | Seals |
---|---|---|---|---|
65x110x10 HMS5 RG | 65 | 110 | 10 | Seals |
71914 ACE/HCP4A | 70 | 100 | 16 | Bearings, units and housings |
85x120x12 HMS5 RG | 85 | 120 | 12 | Seals |
G 43x53x4 | 43 | 53 | 4 | Seals |
NJG 2340 VH | 200 | 420 | 138 | Bearings, units and housings |
NNCF 4930 CV | 150 | 210 | 60 | Bearings, units and housings |
NNCF 5017 CV | 85 | 130 | 60 | Bearings, units and housings |
PBM 220240250 M1G1 | 220 | 240 | 250 | Bearings, units and housings |
PCM 13514080 E | 135 | 140 | 80 | Bearings, units and housings |
PCM 161815 E | 16 | 18 | 15 | Bearings, units and housings |
SHR 45 | 45 | - | - | Coupling systems |
Hot number:
10583
140 VS V
21313 EK
23296 CA/W33
25713
48x72x8 HMSA10 V
D/W ER1458-2ZS
FY 25 WF
KR 19 PPA
NNU 4972 B/SPW33
SAFS 22520-11 x 3.1/2 T
SAW 23518 x 3.1/8
SE 512-610
SSAFS 22544 TLC
W 61810
Previous:SSAFS 23026 KA x 4.5/16 Bearings, units and housings ---- Next:SSAFS 23026 KAT x 4.1/2 Bearings, units and housings
Return to SKF bearing