da | 49.212 | mm | |
Da | 120 | mm | |
Ca | 52.807 | mm | |
A1 | 79.375 | mm | |
A2 | 196.85 | mm | |
ba | 29.369 | mm | |
H | 157.162 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
J1 | 50.8 | mm | |
L | 279.4 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 25.4 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
FSAF 611
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1611
|
|||
Taconite seal | TER 24 | |||
|
End plug (suffix Y) |
EPR 5
|
Max. speed for Taconite seal | 1575 | r/min |
P60° | 35.6 | kN | |
P90° | 21.4 | kN | |
P120° | 13.3 | kN | |
P150° | 12 | kN | |
P180° | 14.2 | kN | |
Pa | 4.8 | kN |
Mass pillow block | 12.4 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 136.08 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1306 EKTN9 + H 306 | 25 | 72 | 19 | Bearings, units and housings |
---|---|---|---|---|
199 VS V | 180 | - | - | Seals |
26124 | 66.675 | 85.09 | 9.53 | Seals |
32x42x7 HMS5 V | 32 | 42 | 7 | Seals |
401205 | 108 | - | - | Seals |
50x72x10 HMSA10 V | 50 | 72 | 10 | Seals |
55x70x8 HMS5 RG | 55 | 70 | 8 | Seals |
638/5-2Z | 5 | 11 | 5 | Bearings, units and housings |
71901 ACE/HCP4AH | 12 | 24 | 6 | Bearings, units and housings |
7214 BECBP | 70 | 125 | 24 | Bearings, units and housings |
729 ACD/HCP4A | 9 | 26 | 8 | Bearings, units and housings |
SAF 22640 x 7.1/4 | 184.15 | - | - | Bearings, units and housings |
Hot number:
27293
401101
40x68x10 HMS5 V
527232
718/670 AMB
7318 BEGAM
90019
99549
D/W R144 R-2Z
ICOS-D1B06 TN9
NJ 2316 ECM
NNCF 4852 CV
NUP 311 ECJ
OKF 670
SAF 23040 KAT x 7.1/4
Previous:FSAF 1611 Bearings, units and housings ---- Next:FSAF 1611 x 1.7/8 Bearings, units and housings
Return to SKF bearing