da | 61.913 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
FSAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Labyrinth ring |
2 x LOR 37
|
|||
PosiTrac Plus contact element |
2 x B10724-37
|
|||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for PosiTrac Plus seal | 2350 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 12.5 | kN |
Mass pillow block | 23.6 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
105x130x12 HMSA10 V | 105 | 130 | 12 | Seals |
---|---|---|---|---|
1425 VRME R | 1350 | - | - | Seals |
170x200x15 HMSA10 V | 170 | 200 | 15 | Seals |
31511 | 80.01 | 100.22 | 10 | Seals |
315523 | 485 | 740 | - | Bearings, units and housings |
411203 | 1065 | - | - | Seals |
524225 | 962.025 | - | - | Seals |
7009 CD/HCP4AH | 45 | 75 | 16 | Bearings, units and housings |
71917 ACD/HCP4AH1 | 85 | 120 | 18 | Bearings, units and housings |
99596 | 150.8252 | 161.925 | 28.575 | Seals |
FYRP 2 11/16 | 68.2625 | - | - | Bearings, units and housings |
LM 102949/910 | 45.242 | 73.431 | 19.558 | Bearings, units and housings |
Hot number:
10 VA V
14975
210x250x20 HDS1 V
30x42x8 HMS5 V
534953
61910
91398
9852
99819
NNU 4960 B/SPW33
S7003 ACE/HCP4A
SAF 1613 x 2.1/4 T
SAFS 22518-11 x 3.1/4 TLC
SAW 23530
TUJ 20 TF
Previous:FSAF 22615 T Bearings, units and housings ---- Next:FSAF 22615 x 2.1/2 Bearings, units and housings
Return to SKF bearing