da | 61.913 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
A2 | 223.838 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
L | 349.25 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 37 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 12.5 | kN |
Mass pillow block | 24.3 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
2307 E-2RS1KTN9 | 35 | 80 | 31 | Bearings, units and housings |
---|---|---|---|---|
38x62x10 HMSA10 V | 38 | 62 | 10 | Seals |
61996 MA | 480 | 650 | 78 | Bearings, units and housings |
64x80x8 HMSA10 RG | 64 | 80 | 8 | Seals |
71917 ACB/P4A | 85 | 120 | 18 | Bearings, units and housings |
BT4B 332997 B/HA1 | 287.5 | 440 | - | Bearings, units and housings |
HM 31/500 | 80 | - | 500 | Bearings, units and housings |
IR 60x68x25 | 60 | 68 | 25 | Bearings, units and housings |
NAO 17x35x16 | 17 | 35 | 16 | Bearings, units and housings |
PCM 11011550 M | 110 | 115 | 50 | Bearings, units and housings |
SSAFS 22520 x 3.5/16 T | 84.1375 | - | - | Bearings, units and housings |
W 618/6 R | 6 | 13 | 3.5 | Bearings, units and housings |
Hot number:
1181300
2313 KM
BD-23176 CAK/W33-OH 3176 H
32215T78/DB
409502
413753
526715
7336 BCBM
86468
9853
GB 1020
NJ 314 ECML
RNA 4910.2RS
SAFS 23048 KAT x 8.1/2
SNW 36x6.7/16
Previous:SAF 22615 Bearings, units and housings ---- Next:SAF 22615 TLC Bearings, units and housings
Return to SKF bearing