da | 63.5 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
A2 | 223.838 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
FSAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 38 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 12.5 | kN |
Mass pillow block | 23.6 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16x28x7 HMS5 V | 16 | 28 | 7 | Seals |
---|---|---|---|---|
34700 | 88.1126 | 117.5 | 15.88 | Seals |
450 VL V | 405 | - | - | Seals |
56x72x8 HMS5 V | 56 | 72 | 8 | Seals |
7003 ACE/HCP4A | 17 | 35 | 10 | Bearings, units and housings |
7012 ACB/P4A | 60 | 95 | 18 | Bearings, units and housings |
BT2B 334068/HA1VA901 | 408.4 | 546.1 | - | Bearings, units and housings |
MVR2-17 | 17 | 34 | - | Seals |
PCM 13514060 E | 135 | 140 | 60 | Bearings, units and housings |
SNW 124x4.3/16 | 106.3625 | 155.702 | 117.8052 | Bearings, units and housings |
W 10 | 50.5968 | 74.2188 | - | Bearings, units and housings |
YAR 210-111-2F | 90 | Bearings, units and housings |
Hot number:
21298
BD-22330-2CS5K/VT143-H 2330
35076
45x68x7 HMS5 V
7048 CD/P4A
71928 ACD/P4AH1
AOH 2264 G
KD21-354
PBM 150170240 M1G1
SAW 23218 TLC
SCF 80 ES
SNP 3180x14.15/16
SYF 45 FM
WS 81238
ZW 35x42
Previous:FSAF 22615 x 2.1/2 Bearings, units and housings ---- Next:FSAF 22615 x 2.1/2 TLC Bearings, units and housings
Return to SKF bearing