da | 61.913 | mm | |
Da | 160 | mm | |
Ca | 64.795 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 192.088 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
L | 349.25 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.94 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SAF 615
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Labyrinth ring |
2 x LOR 37
|
|||
PosiTrac Plus contact element |
2 x B10724-37
|
|||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for PosiTrac Plus seal | 2350 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 12.5 | kN |
Mass pillow block | 24.3 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14223 | 36.5252 | 53.98 | 7.95 | Seals |
---|---|---|---|---|
626/HR22Q2 | 6 | 19 | 6 | Bearings, units and housings |
71811 ACD/HCP4 | 55 | 72 | 9 | Bearings, units and housings |
7212 BECBM | 60 | 110 | 22 | Bearings, units and housings |
80x125x10 CRW1 V | 80 | 125 | 10 | Seals |
891/670 M | 670 | 800 | 78 | Bearings, units and housings |
AHX 312 | 55 | 60 | 40 | Bearings, units and housings |
KR 47 PPXA | - | 47 | 24 | Bearings, units and housings |
OKC 260 | 260 | - | ||
NJ 208 ECP | 40 | 80 | 18 | Bearings, units and housings |
NJ 244 ECM | 220 | 400 | 65 | Bearings, units and housings |
W 624 R-2RZ | 4 | 13 | 5 | Bearings, units and housings |
Hot number:
1212 EKTN9 + H 212
2220 M
300x350x25 HDS1 R
55x80x10 HMSA10 RG
61906
71919 CB/HCP4A
8677
90812
IR 60x70x28
NA 6912
NU 334 M
PFD 5/8 TF
RMS 22
SNP 3196x18
YAT 205-100
Previous:SAF 22615 T Bearings, units and housings ---- Next:SAF 22615 x 2.1/2 Bearings, units and housings
Return to SKF bearing