Housing material | Cast iron |
d | 33.338 | mm | |
A | 34.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 24.5 | mm | |
B | 42.9 | mm | |
Da | H11 | 106.4 | mm |
Db1 | 87 | mm | |
Db2 | 95 | mm | |
J | 92 | mm | |
L | 118 | mm | |
N | 14 | mm | |
s1 | 25.4 | mm | |
T | 46.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 22.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 29 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.35 | kg |
Thread grub screw | G2 | 5/16-24 UNF | ||
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
125x150x12 CRW1 V | 125 | 150 | 12 | Seals |
---|---|---|---|---|
27334 | 69.85 | 92.02 | 11.13 | Seals |
32x43x7 HMSA10 V | 32 | 43 | 7 | Seals |
33033 | 84.1502 | 104.78 | 11.13 | Seals |
6226-2Z | 130 | 230 | 40 | Bearings, units and housings |
68x90x10 HMSA10 RG | 68 | 90 | 10 | Seals |
95525/95925 | 133.35 | 234.95 | 63.5 | Bearings, units and housings |
N 203 ECPH | 17 | 40 | 12 | Bearings, units and housings |
NJ 215 ECML | 75 | 130 | 25 | Bearings, units and housings |
PCM 121410 E | 12 | 14 | 10 | Bearings, units and housings |
SNW 11x2 | 50.8 | 55 | 46.609 | Bearings, units and housings |
YELAG 209-112 | 44.45 | 85 | 42.8 | Bearings, units and housings |
Hot number:
16814
1850 VA R
209
BD-23120 CCK/W33-AHX 3120
40x72x10 HMSA10 V
71956 CD/P4A
85019
85x130x12 HMS5 RG
950x1006x20 HDS2 R
C 4908 V
FY 2.3/16 TF/VA228
NJ 408 MA
NNU 41/1250 M/W33
NU 211 ECM/HC5C3
OH 2356 H
Previous:FY 1.3/8 WDW Bearings, units and housings ---- Next:FY 1.5/8 TF Bearings, units and housings
Return to SKF bearing