| Housing material | Cast iron | |||


| d | 57.15 | mm | |
| A | 52 | mm | |
| A1 | 17 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 39 | mm | |
| B | 65.1 | mm | |
| Da | H11 | 161.9 | mm |
| Db1 | 130 | mm | |
| Db2 | 143 | mm | |
| J | 143 | mm | |
| L | 175 | mm | |
| N | 18 | mm | |
| s1 | 39.7 | mm | |
| T | 73.7 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 34.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 161 | mm | |
| J7 | 49.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 52.7 | kN | |
| Basic static load rating | C0 | 36 | kN | |
| Fatigue load limit | Pu | 1.53 | kN | |
| Limiting speed | 3400 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 4.05 | kg |
| Thread grub screw | G2 | 3/8-24 UNF | ||
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 135x170x12 HMSA10 RG | 135 | 170 | 12 | Seals |
|---|---|---|---|---|
| 12x22x7 CRW1 V | 12 | 22 | 7 | Seals |
| 1313 EKTN9 | 65 | 140 | 33 | Bearings, units and housings |
| 26x47x7 HMSA10 V | 26 | 47 | 7 | Seals |
| 400550 | 49 | - | - | Seals |
| 40x55x8 CRW1 R | 40 | 55 | 8 | Seals |
| 52234 M | 150 | 240 | 97 | Bearings, units and housings |
| 56136 | 142.875 | 174.63 | 12.7 | Seals |
| FBSA 210/QBC | 50 | - | 165 | Bearings, units and housings |
| NU 321 ECP | 105 | 225 | 49 | Bearings, units and housings |
| OKC 170 | 170 | - | ||
| PWTR 3072.2RS | 30 | 72 | 28 | Bearings, units and housings |
Hot number:
13661
213-2ZNR
33108/DF
350x390x18 HDS2 D
510x560x25 HDS2 D
51426 M
62204-2RS1
7221 BECBP
99386
TQO design
C 6915-2CS5V/GEM9
FSAF 1615 x 2.3/8 T
GE 20 TXE-2LS
PCM 10010550 M
SAW 23536 x 6.5/16
Previous:FY 2.1/2 TF Bearings, units and housings ---- Next:FY 2.11/16 TF Bearings, units and housings
Return to SKF bearing