Housing material | Cast iron |
d | 35 | mm | |
A | 34.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 22 | mm | |
B1 | 39.5 | mm | |
Da | H11 | 106.4 | mm |
Db1 | 87 | mm | |
Db2 | 95 | mm | |
J | 92 | mm | |
L | 118 | mm | |
N | 14 | mm | |
s1 | 24.3 | mm | |
T | 45.3 | mm | |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). |
|||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 29 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 1100 | r/min |
Mass bearing unit | 1.3 | kg |
Thread grub screw | G2 | M6 | ||
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 7.4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
Appropriate SKF mounting kit | 626830 |
Housing |
FY 507 M/VZ033
|
|||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
100x130x12 HMSA10 V | 100 | 130 | 12 | Seals |
---|---|---|---|---|
13676 | 34.925 | 57.15 | 7.95 | Seals |
15802 | 40 | 52 | 14.3 | Seals |
19407 | 49.2252 | 81 | 7.95 | Seals |
22311 EK | 55 | 120 | 43 | Bearings, units and housings |
25x40x8 HMS5 RG | 25 | 40 | 8 | Seals |
3212 A-2Z | 60 | 110 | 36.5 | Bearings, units and housings |
471751 | 1632 | - | - | Seals |
6314-2RS1 | 70 | 150 | 35 | Bearings, units and housings |
HJ 230 EC | 150 | 193.3 | 19.5 | Bearings, units and housings |
OKCX 310 | 310 | - | ||
S71920 ACD/P4A | 100 | 140 | 20 | Bearings, units and housings |
Hot number:
165x190x15 HMSA10 RG
20x35x8 HMS5 V
305805 C-2Z
7018 CB/HCP4A
811/1120 M
9862
D/W R188-2Z
FYRP 1 1/2-18
KM 14
NATR 40 PPA
NU 324 ECP
NUB 220 ECJ
PSMF 253220 A51
RNA 69/32
TU 45 TF
Previous:FY 35 FM Bearings, units and housings ---- Next:FY 35 LF Bearings, units and housings
Return to SKF bearing