| Material | Pressed steel | |||


| d | 12 | mm | |
| A | 26 | mm | |
| A1 | 18 | mm | |
| B | 27.4 | mm | |
| H | 43.5 | mm | |
| H1 | 22.1 | mm | |
| H2 | 3 | mm | |
| J | 68 | mm | |
| L | 85.5 | mm | |
| N | 9.6 | mm | |
| s1 | 15.9 | mm |
| Basic dynamic load rating | C | 9.56 | kN | |
| Basic static load rating | C0 | 4.75 | kN | |
| Fatigue load limit | Pu | 0.2 | kN | |
| Permissible radial housing load | max. | 1.25 | kN | |
| Limiting speed | 9500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.17 | kg |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 8 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.3125 | in |
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 120x150x12 HMS5 RG | 120 | 150 | 12 | Seals |
|---|---|---|---|---|
| 22318 EKJA/VA405 | 90 | 190 | 64 | Bearings, units and housings |
| 45x80x10 HMS5 V | 45 | 80 | 10 | Seals |
| 50x65x10 HMSA10 V | 50 | 65 | 10 | Seals |
| 71909 ACB/P4AL | 45 | 68 | 12 | Bearings, units and housings |
| 95x130x12 CRW1 V | 95 | 130 | 12 | Seals |
| BTM 170 AM/HCP4CDB | 170 | 260 | 81 | Bearings, units and housings |
| FY 3/4 TF | 19.05 | - | - | Bearings, units and housings |
| GEP 630 FS | 630 | 900 | 450 | Bearings, units and housings |
| IR 17x20x20.5 | 17 | 20 | 20.5 | Bearings, units and housings |
| S7006 FW/HC | 30 | 55 | 13 | Bearings, units and housings |
| SYE 2 3/16-18 | 55.5625 | - | - | Bearings, units and housings |
Hot number:
100x145x12 HMSA10 RG
17x35x7 HMS5 V
19097
30221/DF
316
34700
6306 ETN9
7014 ACE/P4AL1
99450
90813
FY 1.3/16 TF/VA228
LR 20x25x12.5
NA 6915
NU 2308 ECJ
SNL 3180
Previous:P 1.3/4 TR Bearings, units and housings ---- Next:P 15 FM Bearings, units and housings
Return to SKF bearing