

| d | 12 | mm | |
| D | 14 | mm | |
| B | 17 | mm | |
| D1 | 20 | mm | |
| B1 | 1 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.6 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| r | max. | 1 | mm |
| Tolerance shaft | f7 | |||
| Tolerance housing | H7 | |||
| Basic dynamic load rating - radial direction | C | 14.3 | kN | |
| Basic static load rating - radial direction | C0 | 45 | kN | |
| Basic dynamic load rating - axial direction | Ca | 9.15 | kN | |
| Basic static load rating - axial direction | C0a | 28.5 | kN | |
| Specific dynamic load factor | K | 80 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 480 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2 | m/s |
| Coefficient of friction | µ | min. | 0.03 | |
| Coefficient of friction | µ | max. | 0.25 |
| Mass bushing | 0.0066 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 108x140x15 HMSA10 RG | 108 | 140 | 15 | Seals |
|---|---|---|---|---|
| 14810 | 38.1 | 47.6 | 6.35 | Seals |
| 306890 | 340 | 480 | 60 | Bearings, units and housings |
| 3100895 | 787.4 | 863.6 | 25.4 | Seals |
| 7015 ACE/P4AH1 | 75 | 115 | 20 | Bearings, units and housings |
| 80x100x10 HMSA10 RG | 80 | 100 | 10 | Seals |
| 830 VRME R | 796 | - | - | Seals |
| N 326 ECP | 130 | 280 | 58 | Bearings, units and housings |
| NJ 204 ECPHA | 20 | 47 | 14 | Bearings, units and housings |
| NJ 228 ECML | 140 | 250 | 42 | Bearings, units and housings |
| NU 2256 ECML | 280 | 500 | 130 | Bearings, units and housings |
| PFD 30 TR | 30 | - | - | Bearings, units and housings |
Hot number:
BD-22328 CCK/W33-H 2328
2309 ETN9
26x38x7 HMS5 V
58x85x8 CRW1 R
BT4B 331089 A/HA4
BD-C 2316 K-AHX 2316
FSYE 3 7/16
GEH 30 ES-2LS
K 25x30x20
OKCX 870
PPMF 101212
PFD 35 TR
RNA 4916
T2DD 065
SYFWK 1. LTHR
Previous:PCMF 121415 E Bearings, units and housings ---- Next:PCMF 141612 E Bearings, units and housings
Return to SKF bearing