d | 14 | mm | |
D | 16 | mm | |
B | 12 | mm | |
D1 | 22 | mm | |
B1 | 1 | mm | |
c1 | min. | 0.1 | mm |
c1 | max. | 0.6 | mm |
c2 | min. | 0.2 | mm |
c2 | max. | 1 | mm |
a | ±8 | 20 | ° |
r | max. | 1 | mm |
Tolerance shaft | f7 | |||
Tolerance housing | H7 |
Basic dynamic load rating - radial direction | C | 11 | kN | |
Basic static load rating - radial direction | C0 | 34.5 | kN | |
Basic dynamic load rating - axial direction | Ca | 10 | kN | |
Basic static load rating - axial direction | C0a | 31.5 | kN | |
Specific dynamic load factor | K | 80 | N/mm² | |
Specific static load factor | K0 | 250 | N/mm² | |
Factor depending on material and bearing type | KM | 480 | ||
Permissible sliding velocity | v | min. | 0 | m/s |
Permissible sliding velocity | v | max. | 2 | m/s |
Coefficient of friction | µ | min. | 0.03 | |
Coefficient of friction | µ | max. | 0.25 |
Mass bushing | 0.0058 | kg |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10x22x7 HMS5 V | 10 | 22 | 7 | Seals |
---|---|---|---|---|
1750 VL V | 1585 | - | - | Seals |
BD-23084 CAK/W33-OH 3084 H | 400 | 620 | 150 | Bearings, units and housings |
52x72x8 HMSA10 V | 52 | 72 | 8 | Seals |
71912 ACE/P4A | 60 | 85 | 13 | Bearings, units and housings |
AOH 2260 G | 280 | 300 | 170 | Bearings, units and housings |
ECY 215 | - | - | - | Bearings, units and housings |
IR 10X14X12 IS1 | 10 | 14 | 12 | Bearings, units and housings |
K 18x25x22 | 18 | 25 | 22 | Bearings, units and housings |
KRE 90 PPA | - | 90 | 35 | Bearings, units and housings |
KRVE 35 PPA | - | 35 | 52 | Bearings, units and housings |
S7006 CB/P4A | 30 | 55 | 13 | Bearings, units and housings |
Hot number:
22224 E
31261
31309
331290
331590
44x60x8 CRW1 V
625/HR22Q2
6309-Z
7018 ACD/P4AL
BK 0306 TN
GB 1019
LM 603049/012
SAL 60 TXE-2LS
SSAFS 22544 x 7.7/8 T
W 634 R-2Z
Previous:PCMF 121417 E Bearings, units and housings ---- Next:PCMF 141617 E Bearings, units and housings
Return to SKF bearing