

| d | 18 | mm | |
| D | 20 | mm | |
| B | 12 | mm | |
| D1 | 26 | mm | |
| B1 | 1 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.6 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| r | max. | 1 | mm |
| Tolerance shaft | f7 | |||
| Tolerance housing | H7 | |||
| Basic dynamic load rating - radial direction | C | 13.7 | kN | |
| Basic static load rating - radial direction | C0 | 42.5 | kN | |
| Basic dynamic load rating - axial direction | Ca | 9.3 | kN | |
| Basic static load rating - axial direction | C0a | 29 | kN | |
| Specific dynamic load factor | K | 80 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 480 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2 | m/s |
| Coefficient of friction | µ | min. | 0.03 | |
| Coefficient of friction | µ | max. | 0.25 |
| Mass bushing | 0.0073 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 115x145x12 HMSA10 V | 115 | 145 | 12 | Seals |
|---|---|---|---|---|
| 32312 | 60 | 130 | 48.5 | Bearings, units and housings |
| 44x62x8 CRW1 R | 44 | 62 | 8 | Seals |
| 6009-2RS1 | 45 | 75 | 16 | Bearings, units and housings |
| 6210-2RS1/HC5C3WT | 50 | 90 | 20 | Bearings, units and housings |
| 71808 CD/P4 | 40 | 52 | 7 | Bearings, units and housings |
| 7232 BCBM | 160 | 290 | 48 | Bearings, units and housings |
| 81103 TN | 17 | 30 | 9 | Bearings, units and housings |
| 87089 | - | - | 63.5 | Seals |
| FYWK 1.3/16 YTH | 30.162 | - | - | Bearings, units and housings |
| KMT 20 | 32 | - | 100 | Bearings, units and housings |
| NKIB 5914 | 70 | 100 | 40 | Bearings, units and housings |
Hot number:
1588332
36363
6743
71900 ACE/P4A
89414 TN
BT4-8117 E1/C475
FSAF 1515 x 2.3/8
MBL 24
NJ 216 ECM
NU 2212 ECJ
NUKR 35 XA
OKBS 107
SNW 3038x6.13/16
WBB1-8707-2Z
WS 89424
Previous:PCMF 161817 E Bearings, units and housings ---- Next:PCMF 182017 E Bearings, units and housings
Return to SKF bearing