

| d | 20 | mm | |
| D | 23 | mm | |
| B | 16.5 | mm | |
| D1 | 30 | mm | |
| B1 | 1.5 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.7 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| r | max. | 1.5 | mm |
| Tolerance shaft | f7 | |||
| Tolerance housing | H7 | |||
| Basic dynamic load rating - radial direction | C | 22 | kN | |
| Basic static load rating - radial direction | C0 | 69.5 | kN | |
| Basic dynamic load rating - axial direction | Ca | 17.3 | kN | |
| Basic static load rating - axial direction | C0a | 54 | kN | |
| Specific dynamic load factor | K | 80 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 480 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2 | m/s |
| Coefficient of friction | µ | min. | 0.03 | |
| Coefficient of friction | µ | max. | 0.25 |
| Mass bushing | 0.017 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 10050 | 25.4 | 46.43 | 6.35 | Seals |
|---|---|---|---|---|
| 13511 | 34.925 | 47.57 | 7.95 | Seals |
| 6305-RZ | 25 | 62 | 17 | Bearings, units and housings |
| 99163 | 41 | 49.2252 | 15.875 | Seals |
| 9997 | 25.4 | 44.5 | 6.35 | Seals |
| BD1B 634131 | 440 | 520 | 65 | Bearings, units and housings |
| GB 3020 | - | - | 56 | Bearings, units and housings |
| N 207 ECP | 35 | 72 | 17 | Bearings, units and housings |
| SD 20x28x4 | 20 | 28 | 4 | Seals |
| SYWK 1.1/2 YTH | 38.1 | - | - | Bearings, units and housings |
| W 6006 | 30 | 55 | 13 | Bearings, units and housings |
| W 61808-2RZ | 40 | 52 | 7 | Bearings, units and housings |
Hot number:
1100104
32032 X
3300342
50618
7004 ACD/P4A
7008 CB/P4A
71921 CD/HCP4AL
87924
FYTWK 50 LTHR
HA 3134
NCF 29/630 V
NU 210 ECP
RMS 12
SAF 22520 x 3.5/16 TLC
Z 003
Previous:PCMF 202315 E Bearings, units and housings ---- Next:PCMF 202321.5 E Bearings, units and housings
Return to SKF bearing