

| d | 30 | mm | |
| D | 34 | mm | |
| B | 16 | mm | |
| D1 | 42 | mm | |
| B1 | 2 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.7 | mm |
| c2 | min. | 0.8 | mm |
| c2 | max. | 1.6 | mm |
| a | ±8 | 20 | ° |
| r | max. | 2 | mm |
| Tolerance shaft | f7 | |||
| Tolerance housing | H7 | |||
| Basic dynamic load rating - radial direction | C | 30.5 | kN | |
| Basic static load rating - radial direction | C0 | 95 | kN | |
| Basic dynamic load rating - axial direction | Ca | 29 | kN | |
| Basic static load rating - axial direction | C0a | 91.5 | kN | |
| Specific dynamic load factor | K | 80 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 480 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2 | m/s |
| Coefficient of friction | µ | min. | 0.03 | |
| Coefficient of friction | µ | max. | 0.25 |
| Mass bushing | 0.03 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 19x42x6 HMSA10 V | 19 | 42 | 6 | Seals |
|---|---|---|---|---|
| 21311 EK | 55 | 120 | 29 | Bearings, units and housings |
| 292/530 EM | 530 | 710 | 109 | Bearings, units and housings |
| 32034 X | 170 | 260 | 57 | Bearings, units and housings |
| 71807 ACD/HCP4 | 35 | 47 | 7 | Bearings, units and housings |
| C 3168 M | 340 | 580 | 190 | Bearings, units and housings |
| FYT 25 TF/VA201 | 25 | - | 38.8 | Bearings, units and housings |
| HE 2313 | 57.15 | 85 | 65 | Bearings, units and housings |
| KMFE 7 | 11.5 | - | 35 | Bearings, units and housings |
| NA 4918 | 90 | 125 | 35 | Bearings, units and housings |
| PCM 182025 E | 18 | 20 | 25 | Bearings, units and housings |
| W 619/3 R-2Z | 3 | 8 | 3 | Bearings, units and housings |
Hot number:
16034
140x180x12 HMS5 RG
16100/HR11TN
180 VA V
2208 E-2RS1KTN9
35x72x7 HMSA10 V
40x90x8 CRW1 R
81218 TN
HK 2030
HM 3092
NK 47/30
RNA 4907 RS
SAF 1620 x 3.1/2
SNL 3038 G
SYFWK 3/4 LTHR
Previous:PCMF 252821.5 E Bearings, units and housings ---- Next:PCMF 303426 E Bearings, units and housings
Return to SKF bearing