
| d | 47.625 | mm | |
| D | 52.388 | mm | |
| B | 25.4 | mm | |
| M | 5 | mm | |
| c1 | min. | 0.2 | mm |
| c1 | max. | 1 | mm |
| c2 | min. | 1.2 | mm |
| c2 | max. | 2.4 | mm |
| a | ±8 | 20 | ° |
| Shaft diameter range | min. | 47.285 | mm | |
| Shaft diameter range | max. | 47.325 | mm | |
| Housing bore range | min. | 52.388 | mm | |
| Housing bore range | max. | 52.418 | mm |
| Basic dynamic load rating - radial direction | C | 140 | kN | |
| Basic static load rating - radial direction | C0 | 290 | kN | |
| Specific dynamic load factor | K | 120 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 1900 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2.5 | m/s |
| Coefficient of friction | µ | min. | 0.02 | |
| Coefficient of friction | µ | max. | 0.2 |
| Mass bushing | 0.066 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 11200 | 28.575 | 47.04 | 7.95 | Seals |
|---|---|---|---|---|
| 25x52x7 HMSA10 RG | 25 | 52 | 7 | Seals |
| 44973 | 114.3 | 139.73 | 11.13 | Seals |
| 51103 V/HR11T1 | 17 | 30 | 9 | Bearings, units and housings |
| 5652 | 14.3002 | 28.55 | 6.35 | Seals |
| 61800-2RS1 | 10 | 19 | 5 | Bearings, units and housings |
| BTM 140 AM/HCP4CDB | 140 | 210 | 63 | Bearings, units and housings |
| MB 12 A | 60 | 86 | - | Bearings, units and housings |
| NJ 2320 ECJ | 100 | 215 | 73 | Bearings, units and housings |
| NU 2276 ECMA | 380 | 680 | 175 | Bearings, units and housings |
| RN-4x15.8 BF/G2 | - | - | 4 | Bearings, units and housings |
| W 6003-2RS1/VP311 | 17 | 35 | 10 | Bearings, units and housings |
Hot number:
130x180x12 HMSA10 RG
20596
BD-230/950 CAK/W33-OH 30/950 H
30240/DF
331677
33210/DF
7001 ACE/P4A
99242
90893
BD-C 2316 K-AHX 2316
FYC 20 TF
OH 31/560 H
PBM 190210200 M1G1
SNP 3268x12.7/16
SY 20 TF/VA228
Previous:PCZ 3016 E Bearings, units and housings ---- Next:PCZ 3030 M Bearings, units and housings
Return to SKF bearing