da | 100.013 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 231.775 | mm | |
ba | 42.069 | mm | |
H | 239.316 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
Housing |
SAF 522
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1522
|
|||
Taconite seal | TER 109 | |||
|
End plug (suffix Y) |
EPR 13
|
Max. speed for Taconite seal | 775 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 12.5 | kN |
Mass pillow block | 33.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
15656 | 39.7002 | 63.55 | 7.95 | Seals |
---|---|---|---|---|
30x50x8 CRW1 V | 30 | 50 | 8 | Seals |
51088 F | 440 | 480 | 30 | Bearings, units and housings |
6203-RSL | 17 | 40 | 12 | Bearings, units and housings |
6248 | 15.875 | 29.997 | 6.502 | Seals |
71907 ACE/HCP4AH | 35 | 55 | 10 | Bearings, units and housings |
85x150x12 HMSA10 RG | 85 | 150 | 12 | Seals |
FSAF 1520 x 3.3/8 | 85.725 | - | - | Bearings, units and housings |
NU 2232 ECML | 160 | 290 | 80 | Bearings, units and housings |
NU 238 ECML | 190 | 340 | 55 | Bearings, units and housings |
OKTC 605 | - | 880 | - | |
SAW 23518 x 3.1/8 | 79.375 | - | - | Bearings, units and housings |
Hot number:
1217 K
35x48x8 HMS5 V
626/HR22T2
811/670 M
TQO design
FSAF 1518 x 3.1/8
KD21-304
NA 6901
OKC 310
PBM 170190160 M1G1
PNA 17/35
SAF 1213 TLC
SSAFS 22544 x 7.7/8 T
YARAG 210
YAR 209-2RF
Previous:SAF 1522 Bearings, units and housings ---- Next:SAF 1522 TLC Bearings, units and housings
Return to SKF bearing