da | 79.375 | mm | |
Da | 190 | mm | |
Ca | 73.787 | mm | |
A1 | 111.125 | mm | |
A2 | 174.625 | mm | |
ba | 42.069 | mm | |
H | 230.981 | mm | |
H1 | 120.65 | mm | |
H2 | 50.8 | mm | |
J | min. | 304.8 | mm |
J | max. | 342.9 | mm |
J1 | 57.15 | mm | |
L | 393.7 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 28.575 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
Housing |
SAF 618
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1618
|
|||
Labyrinth ring |
2 x LOR 187
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 4500 | r/min |
P60° | 128 | kN | |
P90° | 77 | kN | |
P120° | 48.9 | kN | |
P150° | 44.5 | kN | |
P180° | 54.3 | kN | |
Pa | 11.6 | kN |
Mass pillow block | 41.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
405703 | 555 | - | - | Seals |
---|---|---|---|---|
6013-2RS1 | 65 | 100 | 18 | Bearings, units and housings |
6219-2RS1 | 95 | 170 | 32 | Bearings, units and housings |
85629 | - | - | 50.8 | Seals |
BTW 70 CTN9/SP | 70 | 110 | 48 | Bearings, units and housings |
AN 16 | 15.3416 | - | 79.6798 | Bearings, units and housings |
BT4-8038 G/HA1VA901 | 540 | 690 | - | Bearings, units and housings |
GE 140 TXA-2LS | 140 | 210 | 70 | Bearings, units and housings |
GX 25 F | 25 | 62 | 22.5 | Bearings, units and housings |
IR 95x105x26 EGS | 95 | 105 | 26 | Seals |
NU 2205 ECP | 25 | 52 | 18 | Bearings, units and housings |
W 638/4-2RS1 | 4 | 9 | 4 | Bearings, units and housings |
Hot number:
1726305-2RS1
18444
52206
524221
52x63x8 HMSA10 V
6204-2RSLTN9/HC5C3WT
7018 CB/P4AL
71904 ACE/HCP4A
7221 BECBP
BT1B 617089 B
GEM 35 ESX-2LS
NNU 4960 BK/SPW33
SAF 22520
SNL 3076 TURT
YSP 210 SB-2F
Previous:SAF 1618 x 3.1/4 TLC Bearings, units and housings ---- Next:SAF 1618 x 3.1/8 T Bearings, units and housings
Return to SKF bearing