da | 120 | mm | |
db | 134.938 | mm | |
dc | 115.888 | mm | |
Da | 215.001 | mm | |
Ca | 67.793 | mm | |
A1 | 120.65 | mm | |
A2 | 254 | mm | |
S | 4.763 | mm | |
ba | 53.181 | mm | |
H | 257.175 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.831 | mm |
End plug (suffix Y) |
EPR 15
|
Max. speed for Taconite seal | 575 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 52.5 | kN |
Mass pillow block | 45.8 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 765.45 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
20586 | 52.4002 | 76.12 | 11.13 | Seals |
---|---|---|---|---|
25714 | 65.1002 | 95.28 | 11.13 | Seals |
32314 | 70 | 150 | 54 | Bearings, units and housings |
7010 ACD/HCP4AL | 50 | 80 | 16 | Bearings, units and housings |
7018 CD/HCP4A | 90 | 140 | 24 | Bearings, units and housings |
7030 ACD/HCP4A | 150 | 225 | 35 | Bearings, units and housings |
85073 | - | - | 25.4 | Seals |
FYTB 1.3/16 RM | 30.163 | - | - | Bearings, units and housings |
K 81115 TN | 75 | 100 | Bearings, units and housings | |
SAF 22524 x 4.1/16 | 103.1875 | - | - | Bearings, units and housings |
SAF 22528 x 4.13/16 TLC | 122.2375 | - | - | Bearings, units and housings |
TUWK 35 LTA | 35 | - | - | Bearings, units and housings |
Hot number:
22207 EK
3307 DJ1
310 VE R
470446
6208-Z
90866
C 3038
DMB 8/12
ECCN 060 R
FYTB 511 M
K 22x28x17
NUP 320 ECJ
PPM 121415
SAF 22518
W 606-2RZ
Previous:SAF 22224 Bearings, units and housings ---- Next:SAF 22224 TLC Bearings, units and housings
Return to SKF bearing