da | 42.862 | mm | |
Da | 90 | mm | |
Ca | 29.794 | mm | |
A1 | 60.325 | mm | |
A2 | 89.297 | mm | |
S | 3.572 | mm | |
ba | 26.194 | mm | |
H | 121.841 | mm | |
H1 | 63.5 | mm | |
H2 | 23.813 | mm | |
J | min. | 165.1 | mm |
J | max. | 177.8 | mm |
L | 209.55 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 30.163 | mm | |
R2 | 14.287 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 27.781 | mm |
Housing |
SAF 510
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-10-0
|
|||
Labyrinth ring |
2 x LER 20
|
|||
|
End plug (suffix Y) |
EPR 4
|
Bearing limiting speed | 9500 | r/min |
P60° | 28.9 | kN | |
P90° | 17.3 | kN | |
P120° | 11.1 | kN | |
P150° | 9.79 | kN | |
P180° | 12.5 | kN | |
Pa | 3.47 | kN |
Mass pillow block | 6.19 | kg |
Cap bolt |
2 x 7/16-14 UNC
|
|||
Cap bolt recommended tightening torque | 61 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 31.185 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22260 CC/W33 | 300 | 540 | 140 | Bearings, units and housings |
---|---|---|---|---|
18549 | 47.625 | 60.91 | 6.502 | Seals |
218 NR | 90 | 160 | 30 | Bearings, units and housings |
405703 | 555 | - | - | Seals |
52x72x8 CRWA1 V | 52 | 72 | 8 | Seals |
6002 | 15 | 32 | 9 | Bearings, units and housings |
BC4B 322142/HB1 | 536.176 | 762.03 | - | Bearings, units and housings |
BT2B 334111/HA3VA901 | 482 | 640 | - | Bearings, units and housings |
N 1017 KTNHA/HC5SP | 85 | 130 | 22 | Bearings, units and housings |
OH 3044 H | 200 | 220 | 126 | Bearings, units and housings |
RNA 2205.2RS | 30 | 52 | 17.8 | Bearings, units and housings |
SY 1.11/16 TDW | 42.862 | - | - | Bearings, units and housings |
Hot number:
17x40x7 HMS5 V
40x80x8 HMS5 V
470671
526807
623/HR22Q2
80x115x12 HMS5 V
FSAF 1615 x 2.1/2
NJ 2212 ECPH
NKI 70/35
NUH 2340 ECMH
PCM 081012 M
SAF 22507 x 1.1/4
SI 25 ES
SSAFS 22215 TLC
SYWK 1.1/4 YTH
Previous:SAF 22509-210 Bearings, units and housings ---- Next:SAF 22510 T Bearings, units and housings
Return to SKF bearing