da | 44.45 | mm | |
Da | 90 | mm | |
Ca | 29.794 | mm | |
A1 | 60.325 | mm | |
A2 | 165.1 | mm | |
S | 3.572 | mm | |
ba | 26.194 | mm | |
H | 121.841 | mm | |
H1 | 63.5 | mm | |
H2 | 23.813 | mm | |
J | min. | 165.1 | mm |
J | max. | 177.8 | mm |
L | 209.55 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 30.163 | mm | |
R2 | 14.287 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 27.781 | mm |
Housing |
SAF 510
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-10-0
|
|||
Taconite seal | TER 21 | |||
|
End plug (suffix Y) |
EPR 4
|
Max. speed for Taconite seal | 1800 | r/min |
P60° | 28.9 | kN | |
P90° | 17.3 | kN | |
P120° | 11.1 | kN | |
P150° | 9.79 | kN | |
P180° | 12.5 | kN | |
Pa | 3.47 | kN |
Mass pillow block | 5.69 | kg |
Cap bolt |
2 x 7/16-14 UNC
|
|||
Cap bolt recommended tightening torque | 61 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 31.185 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
35x49x6 HMSA10 V | 35 | 49 | 6 | Seals |
---|---|---|---|---|
6216-2Z | 80 | 140 | 26 | Bearings, units and housings |
7202 ACD/HCP4A | 15 | 35 | 11 | Bearings, units and housings |
7314 BEGAPH | 70 | 150 | 35 | Bearings, units and housings |
AHX 2319 | 90 | 95 | 85 | Bearings, units and housings |
BTM 80 ATN9/HCP4CDB | 80 | 125 | 40.5 | Bearings, units and housings |
DMB 8/12 | 80 | - | 48 | Bearings, units and housings |
NUP 2307 ECP | 35 | 80 | 31 | Bearings, units and housings |
S7003 CE/HCP4A | 17 | 35 | 10 | Bearings, units and housings |
S7016 CE/P4A | 80 | 125 | 22 | Bearings, units and housings |
S71911 ACB/HCP4A | 55 | 80 | 13 | Bearings, units and housings |
SAF 1522 x 3.7/8 T | 98.425 | - | - | Bearings, units and housings |
Hot number:
1303 EM
15910
23292 CAK/W33
3318 DMA
406603
6311-2Z
6767
71906 ACE/P4A
FY 55 LF
GEZ 400 TXA-2LS
KMFE 20
QJ 202 N2MA
S7018 CD/HCP4A
SY 1.1/2 TDW
W 61808-2RS1
Previous:SAF 22510 x 1.3/4 Bearings, units and housings ---- Next:SAF 22510 x 1.5/8 Bearings, units and housings
Return to SKF bearing