da | 41.275 | mm | |
Da | 90 | mm | |
Ca | 29.794 | mm | |
A1 | 60.325 | mm | |
A2 | 89.297 | mm | |
S | 3.572 | mm | |
ba | 26.194 | mm | |
H | 121.841 | mm | |
H1 | 63.5 | mm | |
H2 | 23.813 | mm | |
J | min. | 165.1 | mm |
J | max. | 177.8 | mm |
L | 209.55 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 30.163 | mm | |
R2 | 14.287 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 27.781 | mm |
Housing |
SAF 510
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-10-0
|
|||
Labyrinth ring |
2 x LER 19
|
|||
|
End plug (suffix Y) |
EPR 4
|
Bearing limiting speed | 9500 | r/min |
P60° | 28.9 | kN | |
P90° | 17.3 | kN | |
P120° | 11.1 | kN | |
P150° | 9.79 | kN | |
P180° | 12.5 | kN | |
Pa | 3.47 | kN |
Mass pillow block | 5.69 | kg |
Cap bolt |
2 x 7/16-14 UNC
|
|||
Cap bolt recommended tightening torque | 61 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 31.185 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1260x1300x18 HDS1 R | 1260 | 1300 | 18 | Seals |
---|---|---|---|---|
3303 A-2ZTN9/MT33 | 17 | 47 | 22.2 | Bearings, units and housings |
40x65x10 HMS5 V | 40 | 65 | 10 | Seals |
51334 M | 170 | 280 | 87 | Bearings, units and housings |
71911 CB/HCP4A | 55 | 80 | 13 | Bearings, units and housings |
84730 | - | - | 66.68 | Seals |
OKBS 76 | 76 | - | - | |
S7016 CD/P4A | 80 | 125 | 22 | Bearings, units and housings |
SY 1.3/4 TF | 44.45 | - | - | Bearings, units and housings |
SYR 1 11/16-18 | 42.8625 | - | - | Bearings, units and housings |
TUJ 45 TF | 45 | - | - | Bearings, units and housings |
W 61902-2RZ | 15 | 28 | 7 | Bearings, units and housings |
Hot number:
180 VA V
22340
292/800 EM
305263 DA
3210 ATN9
619/8-2Z
6745
81156 M
99463
95x140x12 HMSA10 V
FYR 4-18
H 3940
K 42x47x17
MVR2-70
S71920 ACE/P4A
Previous:SAF 22510 x 1.3/4 T Bearings, units and housings ---- Next:SAF 22510 x 1.5/8 T Bearings, units and housings
Return to SKF bearing