da | 50.8 | mm | |
Da | 100 | mm | |
Ca | 30.785 | mm | |
A1 | 69.85 | mm | |
A2 | 171.45 | mm | |
S | 3.175 | mm | |
ba | 26.988 | mm | |
H | 133.35 | mm | |
H1 | 69.85 | mm | |
H2 | 23.813 | mm | |
J | min. | 187.325 | mm |
J | max. | 209.55 | mm |
L | 244.475 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 34.131 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 30.163 | mm |
End plug (suffix Y) |
EPR 5
|
Max. speed for Taconite seal | 1575 | r/min |
P60° | 44.9 | kN | |
P90° | 27.1 | kN | |
P120° | 17.3 | kN | |
P150° | 15.6 | kN | |
P180° | 19.1 | kN | |
Pa | 4.14 | kN |
Mass pillow block | 7.85 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 39.69 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1950557 | 495.3 | 546.1 | 20.62 | Seals |
---|---|---|---|---|
24445 | 61.9252 | 89.99 | 11.13 | Seals |
32397 | 82.55 | 107.92 | 11.13 | Seals |
6202-RSL | 15 | 35 | 11 | Bearings, units and housings |
6300/HR22T2 | 10 | 35 | 11 | Bearings, units and housings |
81112 TN | 60 | 85 | 17 | Bearings, units and housings |
BTM 90 BTN9/P4CDB | 90 | 140 | 45 | Bearings, units and housings |
HM 3172 | 58 | - | 360 | Bearings, units and housings |
HM 801346 X/310 | 38.1 | 82.55 | 29.37 | Bearings, units and housings |
SAF 1511 x 1.13/16 | 46.0375 | - | - | Bearings, units and housings |
SAF 23044 KA x 7.7/8 | 200.025 | - | - | Bearings, units and housings |
SNL 3180 TURT | 380 | - | - | Bearings, units and housings |
Hot number:
BD-22338 CCK/W33-H 2338
BD-241/530 ECAK30/W33-AOH 241/530 G
345 VRME R
7307 BECBM
6410
BC2B 320055 A
GEZH 108 ESX-2LS
KM 31
NJ 412
NKI 32/20
OKBS 78
PSM 182520 A51
PSMF 121820 A51
S71914 ACB/HCP4A
SAF 1622 x 3.7/8 T
Previous:SAF 22511 x 2 Bearings, units and housings ---- Next:SAF 22511-210 Bearings, units and housings
Return to SKF bearing