da | 50.8 | mm | |
Da | 100 | mm | |
Ca | 30.785 | mm | |
A1 | 69.85 | mm | |
A2 | 98.425 | mm | |
S | 3.175 | mm | |
ba | 26.988 | mm | |
H | 133.35 | mm | |
H1 | 69.85 | mm | |
H2 | 23.813 | mm | |
J | min. | 187.325 | mm |
J | max. | 209.55 | mm |
L | 244.475 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 34.131 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 30.163 | mm |
End plug (suffix Y) |
EPR 5
|
Bearing limiting speed | 8500 | r/min |
P60° | 44.9 | kN | |
P90° | 27.1 | kN | |
P120° | 17.3 | kN | |
P150° | 15.6 | kN | |
P180° | 19.1 | kN | |
Pa | 4.14 | kN |
Mass pillow block | 7.85 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 39.69 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
50x72x10 HMS5 RG | 50 | 72 | 10 | Seals |
---|---|---|---|---|
7016 ACE/P4AL | 80 | 125 | 22 | Bearings, units and housings |
BC4B 322039/HA1 | 500 | 670 | - | Bearings, units and housings |
BSA 204 C | 20 | 47 | 14 | Bearings, units and housings |
FY 25 LF | 25 | - | - | Bearings, units and housings |
K 38x43x27 | 38 | 43 | 27 | Bearings, units and housings |
NA 49/32 | 32 | 52 | 20 | Bearings, units and housings |
NJ 412 | 60 | 150 | 35 | Bearings, units and housings |
NKIB 5902 | 15 | 28 | 18 | Bearings, units and housings |
PCM 505520 E | 50 | 55 | 20 | Bearings, units and housings |
PWM 809060 | 80 | 90 | 60 | Bearings, units and housings |
YAR 212-2RF | 60 | 110 | 65.1 | Bearings, units and housings |
Hot number:
1900 VL R
6012-2Z
65x110x10 HMSA10 V
71904 CD/P4A
95x170x13 HMSA10 V
BTW 170 CM/SP
FYK 25 WD
KM 7
NUP 307 ECP
OKCX 290
S7210 ACD/P4A
SAF 1518 x 3.1/16
SAW 23530 x 5.1/8 T
SNW 44x7.15/16
W 61702 R
Previous:SAF 22511 x 1.7/8 T Bearings, units and housings ---- Next:SAF 22511 x 2 T Bearings, units and housings
Return to SKF bearing