da | 80.963 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 206.375 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 260.35 | mm |
J | max. | 298.45 | mm |
L | 349.25 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SAF 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 188 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 21.4 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
110 VS V | 99 | - | - | Seals |
---|---|---|---|---|
17x32x7 HMSA10 V | 17 | 32 | 7 | Seals |
BD-22212 EK-H 312 | 55 | 110 | 28 | Bearings, units and housings |
28x47x10 HMSA10 V | 28 | 47 | 10 | Seals |
530606 | 1206.5 | - | - | Seals |
71905 CD/HCP4A | 25 | 42 | 9 | Bearings, units and housings |
88710 | 225.425 | 257.18 | 15.88 | Seals |
BD-C 2315 K-AHX 2315 G | 70 | 160 | 55 | Bearings, units and housings |
NN 3020 TN9/SP | 100 | 150 | 37 | Bearings, units and housings |
NU 216 ECP | 80 | 140 | 26 | Bearings, units and housings |
SAF 22622 x 3.11/16 | 93.6625 | - | - | Bearings, units and housings |
W 624-2Z | 4 | 13 | 5 | Bearings, units and housings |
Hot number:
23224-2CS5/VT143
33216/DF
470791
4933
619/5-2Z
6208-RS1
650 VE R
7016 CE/P4AL
71920 ACD/P4AH1
C 3132 K
GEP 340 FS
HA 3134 E
NA 6906
RLS 7
SAW 23540 x 7.1/4 TLC
Previous:SAF 22518 Bearings, units and housings ---- Next:SAF 22518 TLC Bearings, units and housings
Return to SKF bearing