da | 77.787 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 196.85 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
L | 349.25 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SSAFS 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Labyrinth ring |
2 x LOR 186
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 5300 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 31.3 | kg |
Cap bolt |
4 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
45x80x10 HMSA10 RG | 45 | 80 | 10 | Seals |
---|---|---|---|---|
470801 | 768 | - | - | Seals |
7006 CE/P4A | 30 | 55 | 13 | Bearings, units and housings |
71915 ACE/P4A | 75 | 105 | 16 | Bearings, units and housings |
7210 ACD/HCP4A | 50 | 90 | 20 | Bearings, units and housings |
D/W R1 | 1.397 | 4.762 | 1.984 | Bearings, units and housings |
FYTB 3/4 TF | 19.05 | - | - | Bearings, units and housings |
N 315 ECP | 75 | 160 | 37 | Bearings, units and housings |
NKX 40 | 40 | 52 | 32 | Bearings, units and housings |
PCM 161815 M | 16 | 18 | 15 | Bearings, units and housings |
W 6206 | 30 | 62 | 16 | Bearings, units and housings |
W 627 XR | 7 | 13 | 3 | Bearings, units and housings |
Hot number:
15460
22317 EJA/VA406
30212T53/DB
32948/DF
71920 ACB/P4A
7415 BGBM
FYNT 100 F
C 2212 KTN9
GEP 750 FS
GS 89416
N 1010 KTNHA/SP
N 1012 KPHA/SP
NA 6913
PBMF 455545 M1G1
SNL 3196 TURA
Previous:SSAFS 22518 T Bearings, units and housings ---- Next:SSAFS 22518 x 3.1/16 T Bearings, units and housings
Return to SKF bearing