da | 82.55 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 206.375 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 260.35 | mm |
J | max. | 298.45 | mm |
L | 349.25 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SAF 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 187 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 21.4 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1317 K + H 317 | 75 | 180 | 41 | Bearings, units and housings |
---|---|---|---|---|
13427 | 34.0106 | 48.9966 | 8.001 | Seals |
23196 CAK/W33 | 480 | 790 | 248 | Bearings, units and housings |
294/850 EF | 850 | 1440 | 354 | Bearings, units and housings |
34840 | 88.9 | 101.68 | 6.35 | Seals |
6007-RS1 | 35 | 62 | 14 | Bearings, units and housings |
6200-RSH | 10 | 30 | 9 | Bearings, units and housings |
6214-Z | 70 | 125 | 24 | Bearings, units and housings |
7218 ACD/HCP4A | 90 | 160 | 30 | Bearings, units and housings |
GB 4940 | - | - | 105 | Bearings, units and housings |
GE 35 CJ2 | 35 | 55 | 20 | Bearings, units and housings |
NU 208 ECM | 40 | 80 | 18 | Bearings, units and housings |
Hot number:
100x150x12 HMSA10 RG
22264 CCK/W33
23124 CC/W33
332168
49301
63.2x83.1x19.3 TP
7321 BEP
81224 TN
GEZ 304 ES-2LS
LM 29749/710
PCMF 121415 E
QJ 208 N2MA
SAF 22611 x 2 T
W 10
W 628
Previous:SAF 22518 x 3.1/4 Bearings, units and housings ---- Next:SAF 22518 x 3.1/4 TLC Bearings, units and housings
Return to SKF bearing