da | 41.275 | mm | |
Da | 110 | mm | |
Ca | 50.8 | mm | |
A1 | 69.85 | mm | |
A2 | 190.5 | mm | |
S | 5.556 | mm | |
ba | 34.925 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 28.575 | mm | |
J | min. | 196.85 | mm |
J | max. | 228.6 | mm |
L | 269.875 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 42.862 | mm | |
R2 | 19.05 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
SAF 610
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-0-10
|
|||
Taconite seal | TER 19 | |||
|
End plug (suffix Y) |
EPR 4
|
Max. speed for Taconite seal | 1800 | r/min |
P60° | 39.1 | kN | |
P90° | 23.6 | kN | |
P120° | 14.2 | kN | |
P150° | 12.9 | kN | |
P180° | 15.6 | kN | |
Pa | 5.96 | kN |
Mass pillow block | 10.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 53.865 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
130x170x12 HMS5 RG | 130 | 170 | 12 | Seals |
---|---|---|---|---|
23024 CCK/W33 + AHX 3024 | 115 | 180 | 46 | Bearings, units and housings |
22x35x7 HMS5 RG | 22 | 35 | 7 | Seals |
BD-23172 CCK/W33-OH 3172 H | 340 | 600 | 192 | Bearings, units and housings |
24026 CCK30/W33 | 130 | 200 | 69 | Bearings, units and housings |
34x44x8 HMS5 V | 34 | 44 | 8 | Seals |
525426 | 1022.35 | - | - | Seals |
85x150x12 HMS5 RG | 85 | 150 | 12 | Seals |
99215 | 55 | 62.0014 | 22.987 | Seals |
NNCF 4938 CV | 190 | 260 | 69 | Bearings, units and housings |
SYNT 35 L | 35 | - | - | Bearings, units and housings |
YAR 204-2RF | 20 | 47 | 31 | Bearings, units and housings |
Hot number:
12660
16005/HR22Q2
17193
1800 VRME R
191022
19940
6301-Z
7017 CD/HCP4AL
7044 ACD/HCP4A
812/630 M
91343
HA 206
NJ 2244 ECML
W 15
Z 010
Previous:SAF 22610 x 1.5/8 Bearings, units and housings ---- Next:SAF 22610-210 Bearings, units and housings
Return to SKF bearing