da | 88.9 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
FSAFS 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Taconite seal | TER 103 | |||
|
End plug (suffix Y) |
EPR 15
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 13.8 | kN |
Mass pillow block | 40.4 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
100x125x12 CRW1 V | 100 | 125 | 12 | Seals |
---|---|---|---|---|
BD-231/710 CAK/W33-AOHX 31/710 | 670 | 1150 | 345 | Bearings, units and housings |
240x280x16 HDS2 R | 240 | 280 | 16 | Seals |
400055 | 4 | - | - | Seals |
50x68x7 HMSA10 V | 50 | 68 | 7 | Seals |
63008-2RS1 | 40 | 68 | 21 | Bearings, units and housings |
65 VS V | 58 | - | - | Seals |
7310 BEGAP | 50 | 110 | 27 | Bearings, units and housings |
86903 | - | - | 63.5 | Seals |
K 81105 TN | 25 | 42 | Bearings, units and housings | |
RNU 1017 MA | 96.5 | 130 | 22 | Bearings, units and housings |
S7003 CE/P4A | 17 | 35 | 10 | Bearings, units and housings |
Hot number:
150x180x12 HMS5 RG
40x70x8 HMSA10 V
51407
55x72x8 HMSA10 RG
6306-2ZNR
7213 CD/P4A
AHX 3030
D/W R4-2RS1
GEZ 200 ES-2RS
H 3132
IR 12x16x16
NA 2200.2RSX
NJ 306 ECP
NU 303 ECP
STO 17
Previous:SAFS 22520-11 x 3.1/2 Bearings, units and housings ---- Next:SAFS 22520-11 x 3.1/2 TLC Bearings, units and housings
Return to SKF bearing