da | 90 | mm | |
db | 104.775 | mm | |
dc | 85.725 | mm | |
Da | 160 | mm | |
Ca | 62.23 | mm | |
A1 | 98.425 | mm | |
A2 | 210.344 | mm | |
S | 4.763 | mm | |
ba | 47.625 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 44.45 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 750 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 14.1 | kN |
Mass pillow block | 23.1 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16286 | 41.275 | 62.5348 | 6.35 | Seals |
---|---|---|---|---|
18264 | 46.0502 | 76.2 | 9.53 | Seals |
3302 ATN9 | 15 | 42 | 19 | Bearings, units and housings |
528720 | 228.6 | 266.7 | 15.88 | Seals |
71907 ACE/HCP4AL | 35 | 55 | 10 | Bearings, units and housings |
89948 | - | - | 49.987 | Seals |
D/W R2-5 R | 3.175 | 7.938 | 2.779 | Bearings, units and housings |
NNCF 5036 CV | 180 | 280 | 136 | Bearings, units and housings |
S71910 ACD/HCP4A | 50 | 72 | 12 | Bearings, units and housings |
SHT 160 | 160 | - | - | Coupling systems |
SY 1.11/16 LDW | 42.8625 | - | - | Bearings, units and housings |
SYK 506 | - | - | - | Bearings, units and housings |
Hot number:
4980
58x80x8 HMSA10 V
607/HR11TN
708 ACE/P4A
91305
95x110x12 HMS5 RG
FY 504 M
BD-C 2314 K-H 2314
GB 3012
K 89422 M
NJ 214 ECM
PBMF 223220 M1G1
PFD 35 WF
W 6008-2Z
SYNT 55 LTF
Previous:SAW 23218 Bearings, units and housings ---- Next:SAW 23218 TLC Bearings, units and housings
Return to SKF bearing