da | 90 | mm | |
db | 104.775 | mm | |
dc | 85.725 | mm | |
Da | 160 | mm | |
Ca | 62.23 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 47.625 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 44.45 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 3800 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 14.1 | kN |
Mass pillow block | 23.1 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
25x46x7 HMS5 RG | 25 | 46 | 7 | Seals |
---|---|---|---|---|
2600330 | 660.4 | 701.68 | 19.05 | Seals |
45x85x10 HMSA10 V | 45 | 85 | 10 | Seals |
47x70x10 HMS5 RG | 47 | 70 | 10 | Seals |
6013-Z | 65 | 100 | 18 | Bearings, units and housings |
90150 | - | - | 34.925 | Seals |
BC4-8052/HA4 | 500 | 670 | - | Bearings, units and housings |
C 41/670 MB | 670 | 1090 | 412 | Bearings, units and housings |
FYT 1.3/4 TF/VA201 | 44.45 | - | 54.2 | Bearings, units and housings |
NCF 2234 V | 170 | 310 | 86 | Bearings, units and housings |
NK 43/20 | 43 | 53 | 20 | Bearings, units and housings |
PCM 323630 E | 32 | 36 | 30 | Bearings, units and housings |
Hot number:
23099
24048 CCK30/W33
25x46x7 HMSA10 V
38x58x8 CRW1 V
47890/47820
6028-Z
7030 CD/HCP4A
71913 CD/HCP4A
BD-C 3232 K-H 2332 L
HJ 414
NU 1013 ECP/C3VL0241
PBM 182530 M1G1
RN-5x25.8 BF/G2
SYR 2 3/4-18
W 638/1
Previous:SALKB 8 F Bearings, units and housings ---- Next:SAW 23218 T Bearings, units and housings
Return to SKF bearing