da | 80.963 | mm | |
Da | 160 | mm | |
Ca | 62.23 | mm | |
A1 | 98.425 | mm | |
A2 | 206.375 | mm | |
S | 4.763 | mm | |
ba | 47.625 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 47.625 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SAW 518
|
|||
Bearing | 23218 CCK/W33 | |||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 188 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 14.1 | kN |
Mass pillow block | 23.1 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
199 VA V | 180 | - | - | Seals |
---|---|---|---|---|
22x47x7 HMSA10 V | 22 | 47 | 7 | Seals |
24052 CC/W33 | 260 | 400 | 140 | Bearings, units and housings |
309-Z | 45 | 100 | 25 | Bearings, units and housings |
30x48x8 HMS5 RG | 30 | 48 | 8 | Seals |
42x65x10 HMS5 RG | 42 | 65 | 10 | Seals |
6200-2ZNR | 10 | 30 | 9 | Bearings, units and housings |
71907 ACE/P4A | 35 | 55 | 10 | Bearings, units and housings |
H 715345/311 | 71.438 | 136.525 | 46.038 | Bearings, units and housings |
PCM 556050 E | 55 | 60 | 50 | Bearings, units and housings |
RNA 4838 | 210 | 240 | 50 | Bearings, units and housings |
SAFS 23052 KAT x 9.7/16 | 239.7125 | - | - | Bearings, units and housings |
Hot number:
190x220x12 HMS5 RG1
2218 KM
37390
408000
71920 CD/P4A
AH 313 G
ECW 204
FY 1.3/8 LDW
FY 35 TR
IR 12x15x12 EGS
IR 25x32x22
KM 8
PWTR 15.2RS
S71903 ACD/HCP4A
W 638/2 XR-2Z
Previous:SAW 23244 TLC Bearings, units and housings ---- Next:SAW 23518 TLC Bearings, units and housings
Return to SKF bearing