da | 79.375 | mm | |
Da | 160 | mm | |
Ca | 62.23 | mm | |
A1 | 98.425 | mm | |
A2 | 206.375 | mm | |
S | 4.763 | mm | |
ba | 47.625 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 47.625 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SAW 518
|
|||
Bearing | 23218 CCK/W33 | |||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 187 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 14.1 | kN |
Mass pillow block | 23.1 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
7056 BGM | 280 | 420 | 65 | Bearings, units and housings |
---|---|---|---|---|
71920 CE/P4AH1 | 100 | 140 | 20 | Bearings, units and housings |
72x90x10 HMSA10 V | 72 | 90 | 10 | Seals |
72x95x12 HMS5 V | 72 | 95 | 12 | Seals |
FY 3. UTF | 76.2 | - | - | Bearings, units and housings |
NU 312 ECP | 60 | 130 | 31 | Bearings, units and housings |
PCM 455040 E | 45 | 50 | 40 | Bearings, units and housings |
PCZ 4832 M | 76.2 | 80.9625 | 50.8 | Bearings, units and housings |
SAF 22617 T | 74.6125 | - | - | Bearings, units and housings |
SAFS 23024 KA x 4.1/16 | 103.1875 | - | - | Bearings, units and housings |
SY 12 TF | 12 | - | - | Bearings, units and housings |
YAT 215-215 | 74.613 | 130 | 53.5 | Bearings, units and housings |
Hot number:
15343
18666
19x42x6 HMSA10 V
22206 E
22407
315869 A
32240/DF
400164
6207-2RZTN9/HC5C3WT
BC4-8053/HA4
NNCF 4852 CV
NNU 4188 K30M/W33
PNA 17/35
PSM 040804 A51
SAF 22611 x 2 T
Previous:SAW 23518 x 3.1/8 Bearings, units and housings ---- Next:SAW 23518 x 3.1/8 TLC Bearings, units and housings
Return to SKF bearing