da | 88.9 | mm | |
Da | 180 | mm | |
Ca | 70.104 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
S | 4.763 | mm | |
ba | 51.594 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
SAW 520
|
|||
Bearing | 23220 CCK/W33 | |||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Taconite seal | TER 103 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 18.1 | kN |
Mass pillow block | 34 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
23038 CC/W33 | 190 | 290 | 75 | Bearings, units and housings |
---|---|---|---|---|
23230 CCK/W33 + AHX 3230 G | 145 | 270 | 96 | Bearings, units and housings |
32248/DF | 240 | 440 | - | Bearings, units and housings |
33712 | 85.725 | 111.15 | 11.13 | Seals |
71819 ACD/P4 | 95 | 120 | 13 | Bearings, units and housings |
85008 | 215.9 | 254 | 17.48 | Seals |
90823 | - | - | 45 | Seals |
C 39/1500 MB | 1500 | 1950 | 335 | Bearings, units and housings |
D/W R4 R-2RZ | 6.35 | 15.875 | 4.978 | Bearings, units and housings |
GEZM 312 ES | 95.25 | 149.225 | 71.425 | Bearings, units and housings |
N 321 ECP | 105 | 225 | 49 | Bearings, units and housings |
OKCX 380 | 380 | - |
Hot number:
36186
46208
7010 ACE/P4A
AOH 24168
CRM 36 AMB
HK 1214 RS
MB 32
N 316 ECM
NJ 232 ECM
NKX 15 Z
NUKRE 40 A
SAF 1615 x 2.3/8 T
SNL 613 TURU
SYK 35 TD
W 6205-2RS1/VP311
Previous:SAW 23520 x 3.1/2 Bearings, units and housings ---- Next:SAW 23520 x 3.1/2 TLC Bearings, units and housings
Return to SKF bearing