da | 85.725 | mm | |
Da | 180 | mm | |
Ca | 70.104 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
S | 4.763 | mm | |
ba | 51.594 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
SAW 520
|
|||
Bearing | 23220 CCK/W33 | |||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Taconite seal |
2 x TER 101
|
|||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 18.1 | kN |
Mass pillow block | 34 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1325 VRME R | 1259 | - | - | Seals |
---|---|---|---|---|
23060-2CS5K/VT143 | 460 | 118 | Bearings, units and housings | |
24320 | 61.9252 | 85.62 | 11.13 | Seals |
331981 | 346.075 | 488.95 | - | Bearings, units and housings |
81184 M | 420 | 500 | 65 | Bearings, units and housings |
7036 CD/P4AL | 180 | 280 | 46 | Bearings, units and housings |
71912 CB/HCP4A | 60 | 85 | 13 | Bearings, units and housings |
FYTWR 1.1/2 YTHR | 38.1 | - | - | Bearings, units and housings |
MB 12 A | 60 | 86 | - | Bearings, units and housings |
SAW 23524 x 4 T | 101.6 | - | - | Bearings, units and housings |
SNW 44x8 | 203.2 | 220 | 149.6314 | Bearings, units and housings |
WS 81152 | 260 | 13.5 | Bearings, units and housings |
Hot number:
1201 ETN9
12343
16384
18 VA R
44967
7220 BECBP
AOH 240/500
BD-C 2211 KV-AHX 311
FSAF 1313 TLC
GEP 400 FS
N 1011 KPHA/SP
NU 244 ECML
NUP 19/600 ECMA/HA1
OKC 430
SAF 22330 TLC
Previous:SAW 23520 x 3.3/8 Bearings, units and housings ---- Next:SAW 23520 x 3.3/8 TLC Bearings, units and housings
Return to SKF bearing