da | 138.113 | mm | |
Da | 289.999 | mm | |
Ca | 113.817 | mm | |
A1 | 158.75 | mm | |
A2 | 288.925 | mm | |
S | 4.763 | mm | |
ba | 82.55 | mm | |
H | 336.55 | mm | |
H1 | 169.875 | mm | |
H2 | 66.675 | mm | |
J | min. | 441.325 | mm |
J | max. | 488.95 | mm |
J1 | 95.25 | mm | |
L | 558.8 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 104.775 | mm | |
R2 | 33.337 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 52.388 | mm |
Housing |
SAW 532
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-32-0
|
|||
Taconite seal | TER 130 | |||
|
End plug (suffix Y) |
EPR 16
|
Max. speed for Taconite seal | 560 | r/min |
P60° | 226 | kN | |
P90° | 136 | kN | |
P120° | 85.9 | kN | |
P150° | 78.3 | kN | |
P180° | 94.3 | kN | |
Pa | 49.8 | kN |
Mass pillow block | 109 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 793.8 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
30308 | 40 | 90 | 25.25 | Bearings, units and housings |
---|---|---|---|---|
403003 | 294 | - | - | Seals |
71905 ACE/HCP4A | 25 | 42 | 9 | Bearings, units and housings |
AOH 3068 G | 320 | 340 | 162 | Bearings, units and housings |
BTM 85 ATN9/P4CDB | 85 | 130 | 40.5 | Bearings, units and housings |
C 3180 M | 400 | 650 | 200 | Bearings, units and housings |
NNCF 5056 CV | 280 | 420 | 190 | Bearings, units and housings |
OKBS 112 | 112 | - | - | |
SE 509 | 45 | - | - | Bearings, units and housings |
SE 510-608 | 45 | - | - | Bearings, units and housings |
SNL 3156 G | 280 | - | - | Bearings, units and housings |
STO 10 X | 10 | 30 | 11.8 | Bearings, units and housings |
Hot number:
30220T100/DB
31758
51240 M
531635
60/500 N1MAS
7005 ACE/P4AL
86029
BD-C 3144 K-AOH 3144
FSAF 1616 T
FY 2.3/16 TF
MB 52
PL 630
PPM 081008
SNW 3134x6
TUWK 1. LTA
Previous:SAW 23532 Bearings, units and housings ---- Next:SAW 23532 TLC Bearings, units and housings
Return to SKF bearing