

| da | 60.325 | mm | |
| Da | 130 | mm | |
| Ca | 37.008 | mm | |
| A1 | 79.375 | mm | |
| A2 | 120.65 | mm | |
| S | 3.175 | mm | |
| ba | 32.544 | mm | |
| H | 161.925 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| L | 285.75 | mm | |
| Threaded holes | |||
| R1 | 46.038 | mm | |
| R2 | 21.431 | mm | |
| RG | 1/4 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 28.575 | mm | |
| Housing |
SSAFS 515
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-15-0
|
|||
| Labyrinth ring |
2 x LOR 36
|
|||
| PosiTrac Plus contact element |
2 x B10724-37
|
|||
|
||||
| End plug (suffix Y) |
EPR 7
|
|||
| Max. speed for PosiTrac Plus seal | 2350 | r/min |

| P60° | 75.6 | kN | |
| P90° | 45.4 | kN | |
| P120° | 28 | kN | |
| P150° | 25.4 | kN | |
| P180° | 30.2 | kN | |
| Pa | 6.94 | kN |
| Mass pillow block | 14.3 | kg |
| Cap bolt |
2 x 1/2-13 UNC
|
|||
| Cap bolt recommended tightening torque | 102 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 68.04 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 22338 CC/W33 | 190 | 400 | 132 | Bearings, units and housings |
|---|---|---|---|---|
| 22x36x7 HMS5 V | 22 | 36 | 7 | Seals |
| 42x67x10 HMS5 RG | 42 | 67 | 10 | Seals |
| 77531 | 196.85 | 228.6 | 15.875 | Seals |
| 90866 | - | - | 62.5 | Seals |
| HE 3132 E | 139.7 | 160 | 119 | Bearings, units and housings |
| KMTA 13 | 25 | - | 65 | Bearings, units and housings |
| NA 4907.2RS | 35 | 55 | 21 | Bearings, units and housings |
| NU 2208 ECJ | 40 | 80 | 23 | Bearings, units and housings |
| NUKRE 90 A | - | 90 | 100 | Bearings, units and housings |
| NUP 2319 ECP | 95 | 200 | 67 | Bearings, units and housings |
| W 6303-2RZ | 17 | 47 | 14 | Bearings, units and housings |
Hot number:
14759
11060
315869 C
380x440x25 HDS2 R
415 VRME R
6009-Z
624-2Z
627/HR22T2
70x95x10 HMS5 RG
BT4B 328725 G/HA1
GS 81120
NJ 208 ECJ
S7203 CD/HCP4A
SAW 23540 x 7.1/4 T
SYE 1 7/16
Previous:SSAFS 22515 x 2.3/8 T Bearings, units and housings ---- Next:SSAFS 22516 Bearings, units and housings
Return to SKF bearing