da | 103.188 | mm | |
Da | 215.001 | mm | |
Ca | 67.793 | mm | |
A1 | 120.65 | mm | |
A2 | 190.5 | mm | |
S | 4.763 | mm | |
ba | 53.181 | mm | |
H | 257.175 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.831 | mm |
Housing |
SSAFS 524
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-24-20
|
|||
Labyrinth ring |
2 x LOR 111
|
|||
|
End plug (suffix Y) |
EPR 14
|
Bearing limiting speed | 3800 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 20.7 | kN |
Mass pillow block | 64 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14935 | 38.1 | 57.15 | 7.95 | Seals |
---|---|---|---|---|
22x35x7 HMSA10 RG | 22 | 35 | 7 | Seals |
29850 | 76.2 | 92.02 | 6.35 | Seals |
32036 X | 180 | 280 | 64 | Bearings, units and housings |
419502 | 1765 | - | - | Seals |
71909 ACE/P4AH1 | 45 | 68 | 12 | Bearings, units and housings |
86970 | - | - | 44.5 | Seals |
GEH 30 ES-2LS | 30 | 55 | 20 | Bearings, units and housings |
HJ 1064 | 320 | 376 | 36 | Bearings, units and housings |
N 316 ECP | 80 | 170 | 39 | Bearings, units and housings |
NU 311 ECM/C3VL0241 | 55 | 120 | 29 | Bearings, units and housings |
SAF 22517 x 2.7/8 T | 73.025 | - | - | Bearings, units and housings |
Hot number:
140 VL V
320x355x16 HDS1 R
35556
52x68x8 HMS5 RG
63005-2RS1
6306-2RS1
71907 ACD/P4A
75x105x10 HMSA10 V
FY 2.3/16 TF/VA201
FYE 1 7/16 N
HE 2340 L
HK 1210
OH 31/630 HE
W 637/9-2ZS
YEL 207-2RF/VL065
Previous:SSAFS 22524 TLC Bearings, units and housings ---- Next:SSAFS 22524 x 4.1/16 T Bearings, units and housings
Return to SKF bearing