

| da | 109.537 | mm | |
| Da | 230 | mm | |
| Ca | 73.812 | mm | |
| A1 | 130.175 | mm | |
| A2 | 269.875 | mm | |
| S | 4.763 | mm | |
| ba | 57.944 | mm | |
| H | 292.1 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| L | 466.725 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 36.513 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 60.325 | mm | |
| Housing |
SSAFS 526
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-26-0
|
|||
| Taconite seal | TER 115 | |||
|
||||
| End plug (suffix Y) |
EPR 15
|
|||
| Max. speed for Taconite seal | 700 | r/min |

| P60° | 189 | kN | |
| P90° | 113 | kN | |
| P120° | 73.8 | kN | |
| P150° | 68.1 | kN | |
| P180° | 84.5 | kN | |
| Pa | 24.9 | kN |
| Mass pillow block | 85.7 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 382.73 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 19612 | 50 | 66.5 | 15 | Seals |
|---|---|---|---|---|
| 51410 | 50 | 110 | 43 | Bearings, units and housings |
| FYTB 3/4 RM | 19.05 | - | - | Bearings, units and housings |
| NK 35/30 TN | 35 | 45 | 30 | Bearings, units and housings |
| NNCF 4968 CV | 340 | 460 | 118 | Bearings, units and housings |
| NU 1292 MA | 460 | 830 | 165 | Bearings, units and housings |
| OH 3076 H | 360 | 380 | 193 | Bearings, units and housings |
| OKBS 130 | 130 | - | - | |
| PBM 172530 M1G1 | 17 | 25 | 30 | Bearings, units and housings |
| SNL 3164 G | 300 | - | - | Bearings, units and housings |
| SSAFS 22228 T | 140 | - | - | Bearings, units and housings |
| YAR 205-100-2RF/VE495 | 25.4 | 52 | 34.1 | Bearings, units and housings |
Hot number:
1094110
2216 EKTN9
29392
593625
6106
627/HR22Q2
7005 CE/P4AL
FYJ 507
N 630
NATR 8 PPA
SAFS 23048 KA x 8.1/2
SNL 3260
SNW 3026x4.5/16
SYE 2 15/16 N
YSPAG 208-108
Previous:SSAFS 22526 x 4.5/16 Bearings, units and housings ---- Next:SSAFS 22526 x 4.5/16 TLC Bearings, units and housings
Return to SKF bearing