da | 174.625 | mm | |
Da | 339.999 | mm | |
Ca | 101.803 | mm | |
A1 | 190.5 | mm | |
A2 | 276.225 | mm | |
S | 4.763 | mm | |
ba | 78.581 | mm | |
H | 398.462 | mm | |
H1 | 200.025 | mm | |
H2 | 79.375 | mm | |
L | 711.2 | mm | |
Threaded holes | |||
R1 | 120.65 | mm | |
R2 | 42.069 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 61.913 | mm |
Housing |
SSAFS 538
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-38-32
|
|||
Labyrinth ring |
2 x LOR 154
|
|||
PosiTrac Plus contact element |
2 x B10724-155
|
|||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for PosiTrac Plus seal | 825 | r/min |
P60° | 290 | kN | |
P90° | 173 | kN | |
P120° | 107 | kN | |
P150° | 94.3 | kN | |
P180° | 113 | kN | |
Pa | 52.5 | kN |
Mass pillow block | 223 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Initial grease fill | 1672.65 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
105x140x12 HMSA10 RG | 105 | 140 | 12 | Seals |
---|---|---|---|---|
115x145x12 CRW1 R | 115 | 145 | 12 | Seals |
20012 | 50 | 75 | 9 | Seals |
330862 B | 244.475 | 327.025 | - | Bearings, units and housings |
37396 | 95.25 | 120.68 | 11.13 | Seals |
51205 V/HR11T1 | 25 | 47 | 15 | Bearings, units and housings |
526246 | 939.8 | - | - | Seals |
71914 ACE/HCP4A | 70 | 100 | 16 | Bearings, units and housings |
FYRP 4 | 101.6 | - | - | Bearings, units and housings |
NJ 309 ECM | 45 | 100 | 25 | Bearings, units and housings |
NU 326 ECJ | 130 | 280 | 58 | Bearings, units and housings |
SAF 23032 KATLC x 5.1/2 | 136.525 | - | - | Bearings, units and housings |
Hot number:
12886
21308 EK
470566
750 VL V
FYRP 2 15/16
HA 2309
K 110x117x24
K 20x28x25
NA 2204.2RSX
NKI 38/30
SAF 1618 x 3.1/8 T
SAF 22518 x 3.1/4 T
SAFS 23024 KA-11 x 4
SAW 23526 x 4.5/16
SSAFS 22530
Previous:SSAFS 22538 x 6.7/8 T Bearings, units and housings ---- Next:SSAFS 22538 x 7 Bearings, units and housings
Return to SKF bearing