

| da | 201.613 | mm | |
| Da | 399.999 | mm | |
| Ca | 117.805 | mm | |
| A1 | 222.25 | mm | |
| A2 | 311.15 | mm | |
| S | 4.763 | mm | |
| ba | 90.487 | mm | |
| H | 473.075 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| L | 831.85 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 79.375 | mm | |
| Housing |
SSAFS 544
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-44-38
|
|||
| Labyrinth ring |
2 x LOR 167
|
|||
|
||||
| End plug (suffix Y) |
EPR 23
|
|||
| Bearing limiting speed | 2000 | r/min |

| P60° | 423 | kN | |
| P90° | 254 | kN | |
| P120° | 160 | kN | |
| P150° | 145 | kN | |
| P180° | 173 | kN | |
| Pa | 71.2 | kN |
| Mass pillow block | 365 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 1/2-13 UNC
|
|||
| Initial grease fill | 2749.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1226 KM | 130 | 230 | 46 | Bearings, units and housings |
|---|---|---|---|---|
| 34x44x8 HMSA10 RG | 34 | 44 | 8 | Seals |
| 395/394 A | 63.5 | 110 | 22 | Bearings, units and housings |
| 464777 | 660.4 | 863.6 | 107.95 | Bearings, units and housings |
| 524209 | 330.2 | - | - | Seals |
| 524347 | 558.8 | - | - | Seals |
| GEC 340 FBAS | 340 | 460 | 135 | Bearings, units and housings |
| H 2324 L | 110 | 145 | 112 | Bearings, units and housings |
| NUH 2332 ECMH/PEX | 160 | 340 | 114 | Bearings, units and housings |
| SAKAC 30 M | 30 | - | 37 | Bearings, units and housings |
| SAW 23238 | 190 | - | - | Bearings, units and housings |
| YET 204/VL065 | 20 | 47 | 21 | Bearings, units and housings |
Hot number:
1400240
32321
42573
43x62x8 HMSA10 RG
62207-2RS1
7001 CD/HCP4A
7030 BGM
71917 CB/P4AL
80x170x13 HMS5 V
90 VS V
BC4-8007/HB1
NK 22/16
SE 211
SNW 5x3/4
TU 15/16 TF
Previous:SSAFS 22540 x 7.1/8 TLC Bearings, units and housings ---- Next:SSAFS 22544 T Bearings, units and housings
Return to SKF bearing