da | 107.95 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 228.6 | mm | |
ba | 46.831 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
L | 387.35 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SSAFS 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Taconite seal | TER 114 | |||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for Taconite seal | 725 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 39.5 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10129 | 25.4 | 50.8 | 6.35 | Seals |
---|---|---|---|---|
6009/HR22T2 | 45 | 75 | 16 | Bearings, units and housings |
627/HR11QN | 7 | 22 | 7 | Bearings, units and housings |
7014 ACE/HCP4AH1 | 70 | 110 | 20 | Bearings, units and housings |
86715 | - | - | 69.85 | Seals |
C 30/710 M | 710 | 1030 | 236 | Bearings, units and housings |
C 3972 M | 360 | 480 | 90 | Bearings, units and housings |
FY 30 TF | 30 | - | - | Bearings, units and housings |
S7018 ACB/HCP4A | 90 | 140 | 24 | Bearings, units and housings |
SAF 23034 KA x 5.13/16 | 147.6375 | - | - | Bearings, units and housings |
SAFS 22515 x 2.1/2 T | 63.5 | - | - | Bearings, units and housings |
Z 015 | 75 | - | 7 | Seals |
Hot number:
1125111
BD-23132-2CS5K/VT143-H 3132 E
28x45x8 HMS5 V
61938
71924 ACB/HCP4A
99269
NATR 10 PPXA
NATR 20
NJ 316 ECML
PFD 35 TF
PRMF 353920
RN-4x34.8 BF/G2
S71912 ACD/P4A
SAF 22615 x 2.3/8
SYFWK 508 L
Previous:SSAFS 23024 KAT x 4.1/16 Bearings, units and housings ---- Next:SSAFS 23024 KAT x 4.1/8 Bearings, units and housings
Return to SKF bearing