da | 241.3 | mm | |
Da | 399.999 | mm | |
Ca | 117.805 | mm | |
A1 | 222.25 | mm | |
A2 | 409.575 | mm | |
ba | 96.838 | mm | |
H | 473.075 | mm | |
H1 | 241.3 | mm | |
H2 | 95.25 | mm | |
L | 831.85 | mm | |
Threaded holes | |||
R1 | 130.175 | mm | |
R2 | 46.831 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 69.85 | mm |
Housing |
SSAFS 052 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x A8898
|
|||
Taconite seal | TER 178 | |||
|
End plug (suffix Y) |
X-5217-2
|
Max. speed for Taconite seal | 325 | r/min |
P60° | 423 | kN | |
P90° | 254 | kN | |
P120° | 160 | kN | |
P150° | 145 | kN | |
P180° | 173 | kN | |
Pa | 81.4 | kN |
Mass pillow block | 351 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Initial grease fill | 2749.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1988/1922 | 28.575 | 57.15 | 19.845 | Bearings, units and housings |
---|---|---|---|---|
604 | 4 | 12 | 4 | Bearings, units and housings |
628/5-2Z | 5 | 11 | 4 | Bearings, units and housings |
7308 ACCBM | 40 | 90 | 23 | Bearings, units and housings |
BT2B 328361/HA1 | 464 | 615.95 | - | Bearings, units and housings |
GE 10 E | 10 | 19 | 9 | Bearings, units and housings |
NJG 2309 VH | 45 | 100 | 36 | Bearings, units and housings |
SA 70 ESX-2LS | 70 | - | 49 | Bearings, units and housings |
SAF 1613 T | 55.5625 | - | - | Bearings, units and housings |
SAF 22530 T | 131.7625 | - | - | Bearings, units and housings |
SAFS 22518-11 x 3.1/4 T | 82.55 | - | - | Bearings, units and housings |
W 628/7-2Z | 7 | 14 | 5 | Bearings, units and housings |
Hot number:
1400 VL R
17x40x7 HMSA10 V
260x300x20 HDS1 R
23708
238/1060 CAMA/W20
316010 A
41287
71910 CB/HCP4A
7202 CD/HCP4A
99152
BC2B 322191
BT4B 332188/HA1
NKX 70
PBMF 15017070 M1G1
SAF 22622 x 3.13/16 T
Previous:SSAFS 23052 KA x 9.7/16 Bearings, units and housings ---- Next:SSAFS 23052 KAT x 9.7/16 Bearings, units and housings
Return to SKF bearing