Material | Cast iron |
d | 44.45 | mm | |
A | 48 | mm | |
A1 | 32 | mm | |
A5 | 26.5 | mm | |
B1 | 43.7 | mm | |
H | 107 | mm | |
H1 | 54 | mm | |
H2 | 21 | mm | |
J | 143.5 | mm | |
J | max. | 152 | mm |
J | min. | 135 | mm |
L | 187 | mm | |
N | 22.5 | mm | |
N1 | 14 | mm | |
s1 | 32.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 4 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 173 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 33.2 | kN | |
Basic static load rating | C0 | 21.6 | kN | |
Fatigue load limit | Pu | 0.915 | kN | |
Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 2.2 | kg |
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
280x320x18 HDS1 R | 280 | 320 | 18 | Seals |
---|---|---|---|---|
30314T84/DB | 70 | 150 | - | Bearings, units and housings |
42x67x10 HMS5 V | 42 | 67 | 10 | Seals |
46x65x8 CRW1 R | 46 | 65 | 8 | Seals |
5067 | 12.7 | 28.55 | 6.35 | Seals |
6028-Z | 140 | 210 | 33 | Bearings, units and housings |
OKF 210 | 210 | 475 | - | |
PCM 404420 M | 40 | 44 | 20 | Bearings, units and housings |
SAF 1611 x 2 T | 50.8 | - | - | Bearings, units and housings |
SAF 1616 x 2.3/4 | 69.85 | - | - | Bearings, units and housings |
SAF 22622 | 100.0125 | - | - | Bearings, units and housings |
SNL 3192 | 430 | - | - | Bearings, units and housings |
Hot number:
1220 VRME R
21749
22558
3209 A
407903
65x90x8 CRW1 V
7019 ACE/HCP4A
FSAF 1311 T
FSAF 22218
K 38x46x32
NKIA 5901
QJ 307 MA
SAF 22522 T
SI 80 TXE-2LS
SYNT 70 FTF
Previous:SY 1.3/4 DUTF Bearings, units and housings ---- Next:SY 1.3/4 TF Bearings, units and housings
Return to SKF bearing