| Housing material | Cast iron | |||


| d | 25 | mm | |
| A | 34 | mm | |
| A1 | 12 | mm | |
| A2 | 25 | mm | |
| B | 34.1 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed with shaft tolerance h6 | 7000 | r/min |
| Mass bearing unit | 0.85 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 14867 | 38.1 | 52.37 | 7.95 | Seals |
|---|---|---|---|---|
| 25x62x10 HMS5 V | 25 | 62 | 10 | Seals |
| 420x464x20 HDS2 R | 420 | 464 | 20 | Seals |
| 629/HR11QN | 9 | 26 | 8 | Bearings, units and housings |
| 6307-2RS1 | 35 | 80 | 21 | Bearings, units and housings |
| 65 VS R | 58 | - | - | Seals |
| BT4-8113 E2/C500 | 330.302 | 438.023 | - | Bearings, units and housings |
| FY 45 WF | 45 | - | - | Bearings, units and housings |
| NKX 40 Z | 40 | 52 | 32 | Bearings, units and housings |
| RNU 1024 ML | 135 | 180 | 28 | Bearings, units and housings |
| SSAFS 23056 KATLC x 10.1/2 | 266.7 | - | - | Bearings, units and housings |
| SYF 45 TF | 45 | - | - | Bearings, units and housings |
Hot number:
1219
23230 CC/W33
40x80x12 HMSA10 V
40x80x8 CRW1 R
7007 ACE/P4A
7028 BGM
75x100x12 HMS5 RG
NA 4908.2RS
PL 56
PWM 110125100
PWM 505860
S7213 ACD/P4A
SAFS 22520-11 x 3.5/16 TLC
SNL 524-620
SNP 3168x12.7/16
Previous:TUJ 20 TF Bearings, units and housings ---- Next:TUJ 30 TF Bearings, units and housings
Return to SKF bearing