d | 12 | mm | |
D | 14 | mm | |
B | 15 | mm | |
D1 | 20 | mm | |
B1 | 1 | mm | |
c1 | min. | 0.1 | mm |
c1 | max. | 0.6 | mm |
c2 | min. | 0.2 | mm |
c2 | max. | 1 | mm |
a | ±8 | 20 | ° |
r | max. | 1 | mm |
Tolerance shaft | f7 | |||
Tolerance housing | H7 |
Basic dynamic load rating - radial direction | C | 12.5 | kN | |
Basic static load rating - radial direction | C0 | 39 | kN | |
Basic dynamic load rating - axial direction | Ca | 9.15 | kN | |
Basic static load rating - axial direction | C0a | 28.5 | kN | |
Specific dynamic load factor | K | 80 | N/mm² | |
Specific static load factor | K0 | 250 | N/mm² | |
Factor depending on material and bearing type | KM | 480 | ||
Permissible sliding velocity | v | min. | 0 | m/s |
Permissible sliding velocity | v | max. | 2 | m/s |
Coefficient of friction | µ | min. | 0.03 | |
Coefficient of friction | µ | max. | 0.25 |
Mass bushing | 0.0061 | kg |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1100258 | 279.4 | 317.5 | 19.05 | Seals |
---|---|---|---|---|
16290 | 41.275 | 65.07 | 7.95 | Seals |
16536 | 42.0116 | 59.0042 | 7.6962 | Seals |
29385 | 74.6252 | 104.78 | 9.53 | Seals |
65037 | 165.1 | 203.2 | 12.7 | Seals |
7020 ACB/P4AL | 100 | 150 | 24 | Bearings, units and housings |
95x170x13 HMSA10 V | 95 | 170 | 13 | Seals |
BD-C 2220 K-AHX 320 | 95 | 180 | 46 | Bearings, units and housings |
IR 8x12x10.5 | 8 | 12 | 10.5 | Bearings, units and housings |
NU 208 ECPH | 40 | 80 | 18 | Bearings, units and housings |
PL 900 | - | - | 61.9252 | Bearings, units and housings |
RMS 9 | 28.575 | 71.438 | 20.638 | Bearings, units and housings |
Hot number:
23040 CCK/W33
2212 E-2RS1TN9
22240 CC/W33
528272
5385
6200/HR11TN
6215/C3VL0241
67515
7x22x7 HMSA10 RG
C 4128-2CS5V/GEM9
D/W R2-2Z
HJ 344
NU 207 ECJ
NU 409
TUWK 1.7/16 LTA
Previous:PCMF 121412 E Bearings, units and housings ---- Next:PCMF 121417 E Bearings, units and housings
Return to SKF bearing