

| d | 3.175 | mm | |
| D | 4.763 | mm | |
| B | 4.763 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.4 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 0.8 | mm |
| a | ±8 | 20 | ° |
| Shaft diameter range | min. | 3.139 | mm | |
| Shaft diameter range | max. | 3.157 | mm | |
| Housing bore range | min. | 4.757 | mm | |
| Housing bore range | max. | 4.77 | mm |
| Basic dynamic load rating - radial direction | C | 1.2 | kN | |
| Basic static load rating - radial direction | C0 | 3.75 | kN | |
| Specific dynamic load factor | K | 80 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 480 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2 | m/s |
| Coefficient of friction | µ | min. | 0.03 | |
| Coefficient of friction | µ | max. | 0.25 |
| Mass bushing | 0.00034 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 209-ZNR | 45 | 85 | 19 | Bearings, units and housings |
|---|---|---|---|---|
| 40x72x10 HMSA10 V | 40 | 72 | 10 | Seals |
| 52224 | 100 | 170 | 68 | Bearings, units and housings |
| 60x80x8 HMS5 V | 60 | 80 | 8 | Seals |
| 626/HR11QN | 6 | 19 | 6 | Bearings, units and housings |
| 72x95x12 HMSA10 RG | 72 | 95 | 12 | Seals |
| 99490 | 125 | 137.16 | 13.9954 | Seals |
| FY 1.1/4 WF | 31.75 | - | - | Bearings, units and housings |
| NUP 309 ECP | 45 | 100 | 25 | Bearings, units and housings |
| OKC 050 | 50 | - | ||
| SAF 22626 x 4.1/2 TLC | 114.3 | - | - | Bearings, units and housings |
| W 63801-2RZ | 12 | 21 | 7 | Bearings, units and housings |
Hot number:
15x24x7 HMSA10 V1
32019 X
36x60x8 CRW1 V
40108
55x72x8 HMSA10 RG
6000-2RSH
81180 M
8702
90866
NJ 2212 ECPH
NU 2076 ECMA
SAF 1517 x 2.13/16 T
W 6007-2Z
SIR 100 ES
SY 2.7/16 DUTF
Previous:PCZ 0202 E Bearings, units and housings ---- Next:PCZ 0303 E Bearings, units and housings
Return to SKF bearing