
| d | 19.05 | mm | |
| D | 22.225 | mm | |
| B | 12.7 | mm | |
| M | 3 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.7 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| Shaft diameter range | min. | 18.74 | mm | |
| Shaft diameter range | max. | 18.771 | mm | |
| Housing bore range | min. | 22.225 | mm | |
| Housing bore range | max. | 22.245 | mm |
| Basic dynamic load rating - radial direction | C | 27 | kN | |
| Basic static load rating - radial direction | C0 | 56 | kN | |
| Specific dynamic load factor | K | 120 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 1900 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2.5 | m/s |
| Coefficient of friction | µ | min. | 0.02 | |
| Coefficient of friction | µ | max. | 0.2 |
| Mass bushing | 0.0084 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 351794 | 530 | 590 | 36 | Bearings, units and housings |
|---|---|---|---|---|
| 35x52x7 HMSA10 V | 35 | 52 | 7 | Seals |
| 47382 | 120.65 | 146.08 | 12.7 | Seals |
| 6008/HR11QN | 40 | 68 | 15 | Bearings, units and housings |
| 87613 | - | - | 12.7 | Seals |
| BS2-2219-2RS/VT143 | 95 | 170 | 51 | Bearings, units and housings |
| GE 180 ESX-2LS | 180 | 260 | 80 | Bearings, units and housings |
| NJG 2330 VH | 150 | 320 | 108 | Bearings, units and housings |
| NU 3980 ECMA | 400 | 540 | 106 | Bearings, units and housings |
| SAF 1617 x 3 | 76.2 | - | - | Bearings, units and housings |
| SAF 22218 TLC | 90 | - | - | Bearings, units and housings |
| SAW 23534 x 5.7/8 T | 149.225 | - | - | Bearings, units and housings |
Hot number:
27368
32219/DF
47896/47820
4991
6204-2ZNR
72x100x10 HMSA10 V
99260
BT1B 328017/HA4
FY 3/4 FM
IR 17x20x20.5
NCF 18/630 V
NJG 2305 VH
QJ 1984 MA
SAF 22540 TLC
SAW 23528 x 5 T
Previous:PCZ 1208 E Bearings, units and housings ---- Next:PCZ 1212 E Bearings, units and housings
Return to SKF bearing