
| d | 25.4 | mm | |
| D | 28.575 | mm | |
| B | 25.4 | mm | |
| M | 4 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.7 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| Shaft diameter range | min. | 25.085 | mm | |
| Shaft diameter range | max. | 25.116 | mm | |
| Housing bore range | min. | 28.575 | mm | |
| Housing bore range | max. | 28.595 | mm |
| Basic dynamic load rating - radial direction | C | 75 | kN | |
| Basic static load rating - radial direction | C0 | 156 | kN | |
| Specific dynamic load factor | K | 120 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 1900 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2.5 | m/s |
| Coefficient of friction | µ | min. | 0.02 | |
| Coefficient of friction | µ | max. | 0.2 |
| Mass bushing | 0.022 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 115x140x12 CRW1 R1 | 115 | 140 | 12 | Seals |
|---|---|---|---|---|
| 150x180x12 HMSA10 V | 150 | 180 | 12 | Seals |
| 19880 | 50.8 | 73.03 | 6.35 | Seals |
| 250x285x15 HMS5 V | 250 | 285 | 15 | Seals |
| 45x60x8 HMS5 V | 45 | 60 | 8 | Seals |
| 99120 | 29.3624 | 34.29 | 12.7 | Seals |
| 99824 | 39.6748 | 47.2186 | 17.4752 | Seals |
| AHX 2310 | 45 | 50 | 50 | Bearings, units and housings |
| FY 1.1/8 FM | 28.575 | - | - | Bearings, units and housings |
| S7006 FW/HC | 30 | 55 | 13 | Bearings, units and housings |
| SY 1. TF | 25.4 | - | - | Bearings, units and housings |
| W 6306-2Z | 30 | 72 | 19 | Bearings, units and housings |
Hot number:
11050
20x42x10 HMSA10 V
23782
35x68x8 CRW1 R
50148
594 A/592 A
6206-2Z/VA201
6308
7016 CD/HCP4AL
7034 ACD/P4AH1
89997
BT4B 334031/HA4C1800
FYTB 1. FM
K 30x40x18
KDMS 554-345/150
Previous:PCZ 1612 M Bearings, units and housings ---- Next:PCZ 1624 E Bearings, units and housings
Return to SKF bearing